I always need a miracle to connect with iwlwifi

Krishna Chaitanya chaitanya.mgit
Sat Nov 9 11:10:49 PST 2013

On Sat, Nov 9, 2013 at 10:22 PM, Felipe Contreras
<felipe.contreras at gmail.com> wrote:
> On Sat, Nov 9, 2013 at 7:10 AM, Krishna Chaitanya
> <chaitanya.mgit at gmail.com> wrote:
>> On Sat, Nov 9, 2013 at 2:22 AM, Felipe Contreras
>> <felipe.contreras at gmail.com> wrote:
>>> On Fri, Nov 8, 2013 at 2:30 PM, Krishna Chaitanya
>>> <chaitanya.mgit at gmail.com> wrote:
>>>>> But we are receiving 0 beacons, waiting for more than 1 won't help.
>>>>> BTW, why NEED_DTIM_BEFORE_ASSOC if the device doesn't *need* the DTIM
>>>>> before the association?
>> This is not just for your case but rather on a generic note. Regarding
>> the flag even i am not
>> too sure but i guess some hardware need to know the DTIM to set the
>> wakeup schedule
>> after the association?
> But not this hardware? Because everything works fine.
>>>> Oops...you just missed, Right after your print there is a check to
>>>> drop frames with BAD CRC :-).
>>> That's why I put the print before that check. Since I don't see the
>>> print, that means the check was never executed. iwlagn_rx_reply_rx()
>>> was never called for the beacon frame.
>> Ok. So when we disable advertising of that flag in the driver you said things
>> are working fine.
> Yes, everything works perfectly.
>> So in that scenario after the connection are you
>> seeing the beacons?
> No, there are no beacons ever, at least from this AP
Oh ok, thats interesting. Are you not seeing any disconnects due
to beacon loss triggers?

Also can you add some debugging to the iwlagn_rx_beacon_notif
(the beacon RX handler)?
> It seems to me all the beacon frames are dropped by the firmware
> before passing them to the driver, so the driver cannot parse them and
> do something sensible even though they are corrupted, the driver never
> gets them.
>> Just want to understand the problem is throughout or just before association.
>> If the driver itself it not getting the beacons then our debugging ends there,
>> some one from intel should guide you through the FW debugging.
> Not really, part of the debugging ends there, but we can still do something.
> What is the meaning of NEED_DTIM_BEFORE_ASSOC, if the driver doesn't
> *need* this? Why fail the association completely, if we don't need to?
> Also, I realized that after rebooting the router, the beacon frames
> are not corrupted any more, so it's a compound problem, yet even in
> the corrupted case, the driver can work just fine, if only it didn't
> *require* the DTIM unnecessarily,

Yeah, that's more of design query with the problem being not able to
Rx the beacons? We need to understand the reason for this flag being
set by the iwlwifi driver.

>as apparently all hardware and even
> other OS'es on this hardware do.

Thats the reason this flag is a _HW_ not all hardwares requrie this
but intel does.

I don't know the background of this flag, johannes is the right guy
to be able to answer this.

More information about the Hostap mailing list