No subject

[bogus at does.not.exist.com]

not sure, though...

Could you please guide me how to do and what to do now?

Thank you very much in advance!

Sincerely
Journeyer

--047d7b339e07c49ced04e4ec69f0
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

<div dir=3D"ltr">Hello list,<div><br></div><div>As of today, maybe for abou=
t 2 weeks, I've compiled "openssl(1.0.1)", "libnl(1.1.4)=
" and "hostapd(0.7.3)" on uClinux(2.6.27) with the modules b=
elow.</div>
<div><br></div><div>rt2800usb.ko</div><div>rt2800lib.ko</div><div>rt2x00usb=
.ko</div><div>rt2x00lib.ko</div><div>mac80211.ko</div><div>cfg80211.ko</div=
><div>compat.ko</div><div>compat_wireless.ko</div><div><br></div><div>My de=
vice is RT5370.</div>
<div><br></div><div>So, now I can find the SSID I wrote on the hostapd.conf=
.</div><div>But I didn't succeed to connect to my device with my androi=
d phone.</div><div>Authentication fails until now.</div><div><br></div>
<div>Now I wonder what else do I need to do more?</div><div>From quick sear=
ch there are "brctl", "iw", "iwconfig" and &q=
uot;dhcpd".</div><div>These seems to be the items I must prepare.</div=
>
<div><br></div><div>I need to make my device(RT5370) an AP. And with this A=
P I must be able to provide a WLAN network in an area.</div><div><br></div>=
<div>Do I need to prepare(cross build and install) "brctl" and &q=
uot;dhcpd" to do this?</div>
<div>I believe iw and iwconfig are not the must items.</div><div><br></div>=
<div>From the failure to connect to the device, I learned I need brctl.... =
I am not sure, though...</div><div><br></div><div>Could you please guide me=
 how to do and what to do now?</div>
<div><br></div><div>Thank you very much in advance!</div><div><br></div><di=
v>Sincerely</div><div>Journeyer</div><div><br></div><div><br></div><div><br=
></div><div><br></div></div>

--047d7b339e07c49ced04e4ec69f0--