Dual Band Configuration (2,4 and 5,8 Ghz) for hostapd

Thomas Schaaf thomas.schaaf
Sat Sep 8 10:44:50 PDT 2012


Hello,

Do you know, what mini PCI Expresscard or PCI Express 1x Low profile
card is capable of doing what I want?

Thomas

2012/9/8 Christian Lamparter <chunkeey at googlemail.com>:
> On Saturday 08 September 2012 18:58:24 Thomas Schaaf wrote:
>> I am trying to configure my wireless adapter (Ubiquiti SR71-E | ath9k)
>> so that it broadcasts an SSID on 2,4 and 5,8 Ghz.
>>
>> Here is my configuration:
>> ## /etc/hostapd/wlanconfig
>> interface=wlan1
>> hw_mode=g
>> driver=nl80211
>> ssid=SSID2
>> channel=6
>> [...]
>>
>> ## /etc/hostapd/wlanconfig5
>> interface=wlan1
>> hw_mode=a
>> driver=nl80211
>> ssid=SSID5
>> channel=44
>> [...]
>> ##
>>
>> Starting hostapd with the following command:
>> # hostapd -dd -t -K /etc/hostapd/wlanconfig /etc/hostapd/wlanconfig5
>>
>> Only broadcasts the 5.8 Ghz wifi.
>> Please correct my configuration as I was unable to find a config for
>> dual band setups.
> I'm sorry to tell you, but while your hardware is certainly "dual-band"
> capable, it can't do both at the same time. If you want to do that, you
> will need to buy a second card (doesn't have to be the same one though,
> e.g.: a cheaper 2.4g-only device is enough).
>
> Regards,
>         Chr



-- 
Thomas Schaaf

Gesch?ftsf?hrer, Entwickler & B?rog?rtner

komola UG (haftungsbeschr?nkt)
Rebenring 33
38106 Braunschweig

Telefon: +49 531 3804200
Mobil: +49 176 27379788

Gesch?ftsf?hrer: Sebastian Hoitz, Thomas Schaaf
Amtsgericht Braunschweig | HRB 201595



More information about the Hostap mailing list