WPA2-PEAP problems

[Ed W]

Hi

> The clients use WPA2-PEAP (with username and passwords) to
> authenticate with the AP and RADIUS server.
>
> The username and password are stored in an 'eap_user' file.

I'm just setting up a hostapd box and getting a very similar failure log
to yours.  I haven't checked exactly, but my config seems very similar
by eye.  My system is a gentoo x86 based box, so not using the same
binaries as you (for example).

Quick question: I see no difference if I try and login with the correct
password or wrong password - do you get the same? In all cases the
client appears to just hang with "authenticating" on the screen and
there is no progress seen? This seems to be a clue, but unsure how to
debug further?

This in your log file seems significant (it's also in mine):

> Jan  1 00:02:22 OpenWrt user.debug hostapd: wlan0: STA
> 00:09:37:09:03:87 IEEE 802.1X: Sending EAP Packet (identifier 225)
>
> Jan  1 00:02:22 OpenWrt user.debug hostapd: wlan0: STA
> 00:09:37:09:03:87 IEEE 802.1X: unauthorizing port
>
> Jan  1 00:02:22 OpenWrt user.warn hostapd: wlan0: STA
> 00:09:37:09:03:87 IEEE 802.1X: authentication failed - EAP type: 0
> ((null))
>
> Jan  1 00:02:22 OpenWrt user.info <http://user.info> hostapd: wlan0:
> STA 00:09:37:09:03:87 IEEE 802.1X: Supplicant used different EAP type:
> 25 (PEAP)
>
>

Please post if you figure out your issue?

Kind regards

Ed W
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20110523/ddf653a4/attachment.htm