wpa_supplicant P2P not working with new compat-wireless release (after 2010-12-20)

[Lin Ma]

Hello, does anyone try the latest compat-wireless release? I tried
compat-wireless-2010-12-26 and compat-wireless-2010-12-20. I failed to
connect two P2P devices with "p2p_find/p2p_connect" commands. One peer
reports the following error.

> p2p_find
OK
<3>P2P-DEVICE-FOUND 00:1b:11:e8:6e:e2 p2p_dev_addr=00:1b:11:e8:6e:e2
pri_dev_type=1-0050F204-1 name='my-AR9280-p2p' config_methods=0x188
dev_capab=0x23 group_capab=0x0
> > p2p_connect 00:1b:11:e8:6e:e2 pbc
OK
<3>P2P-GO-NEG-SUCCESS
<3>CTRL-EVENT-CONNECTED - Connection to 00:1b:11:e8:6d:ec completed (auth)
[id=0 id_str=]
<3>WPS-ENROLLEE-SEEN 00:1b:11:e8:6e:e2 e250ad70-47f2-53f0-9427-51fb9c20e971
1-0050F204-1 0x2388 4 1 [my-AR9280-p2p]
<3>WPS-ENROLLEE-SEEN 00:1b:11:e8:6e:e2 e250ad70-47f2-53f0-9427-51fb9c20e971
1-0050F204-1 0x2388 4 1 [my-AR9280-p2p]
*REPEAT the above error for about 14 times*
<3>P2P-GROUP-FORMATION-FAILURE
<3>P2P-GROUP-REMOVED wlan0 GO

The other peer reports
> p2p_find
OK
<3>P2P-DEVICE-FOUND 00:1b:11:e8:6d:ec p2p_dev_addr=00:1b:11:e8:6d:ec
pri_dev_type=1-0050F204-1 name='my-AR9280-p2p' config_methods=0x188
dev_capab=0x23 group_capab=0x0
<3>P2P-GO-NEG-REQUEST 00:1b:11:e8:6d:ec dev_passwd_id=4
> > p2p_connect 00:1b:11:e8:6d:ec pbc
OK
<3>P2P-GO-NEG-SUCCESS
<3>CTRL-EVENT-SCAN-RESULTS
<3>WPS-AP-AVAILABLE-PBC
<3>Trying to authenticate with 00:1b:11:e8:6d:ec (SSID='DIRECT-GL' freq=2437
MHz)
<3>Trying to associate with 00:1b:11:e8:6d:ec (SSID='DIRECT-GL' freq=2437
MHz)
<3>CTRL-EVENT-SCAN-RESULTS
<3>WPS-AP-AVAILABLE-PBC
*Repeat about 14 times*
<3>Trying to authenticate with 00:1b:11:e8:6d:ec (SSID='DIRECT-GL' freq=2437
MHz)
<3>P2P-GROUP-FORMATION-FAILURE
<3>P2P-GROUP-REMOVED wlan0 client
<3>CTRL-EVENT-TERMINATING - signal 2 received

But compat-wireless-2010-12-04 works fine.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20110106/f9f003a1/attachment.htm