EAP-TLS for wired network
Harshil Anil Kumar Shah
Wed Dec 15 21:10:10 PST 2010
I want to do EAP-TLS authentication for wired network. So can I use hostapd authenticator as I may have to modify some of the functionalities at authenticator, which I obviously cannot do on traditional router/switch. I can use either Intel 3945 ABG or Realtek as a wireless card. Is Hostapd supported on both of these cards?. Authenticator machine is going to have 2 interfaces (one for wpa_supplicant and one for freeradius). So what should be the configuration on hostap authenticator in case it is supported?
Thanks in advance..
**************** CAUTION - Disclaimer *****************
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely
for the use of the addressee(s). If you are not the intended recipient, please
notify the sender by e-mail and delete the original message. Further, you are not
to copy, disclose, or distribute this e-mail or its contents to any other person and
any such actions are unlawful. This e-mail may contain viruses. Infosys has taken
every reasonable precaution to minimize this risk, but is not liable for any damage
you may sustain as a result of any virus in this e-mail. You should carry out your
own virus checks before opening the e-mail or attachment. Infosys reserves the
right to monitor and review the content of all messages sent to or from this e-mail
address. Messages sent to or from this e-mail address may be stored on the
Infosys e-mail system.
***INFOSYS******** End of Disclaimer ********INFOSYS***
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Hostap