WPS with wpa_supplicant dbus control interface

[Jaime Soriano Pastor]

On Wed, May 6, 2009 at 2:28 PM, Jouni Malinen <j at w1.fi> wrote:
> On Wed, May 06, 2009 at 12:50:00PM +0200, Jaime Soriano Pastor wrote:
>> On Wed, May 6, 2009 at 12:26 PM, Jouni Malinen <j at w1.fi> wrote:
>> > Thanks, applied (with
>> > 0002-Non-empty-PIN-is-also-returned-in-wpsPin.patch). I would be
>> > interested in hearing if someone has actually tested this successfully
>> > using dbus.
>
>> I could test it in a laptop with an atheros card and it worked with
>> the methods PBC and REG, it didn't work with PIN.
>
> Which AP were you using? I would be interested in seeing detailed
> wpa_supplicant debug log for the failed attempt.
>
I used Linksys WRT54G2 with out-of-the-box firmware. I don't have any
logs and I cannot setup the scenario now as it doesn't work with my
Broadcom card, so I cannot help a lot now, sorry. Anyway, if I can do
it this week I'll send you the logs.

>> Looking for information about WPS support in linux derivers in
>> linuxwireless.org I could only find it on ath9k
>> (http://linuxwireless.org/en/users/Drivers/ath9k).
>
> While I do run most of my over-the-air testing with ath9k, I would
> expect any Linux driver that is using mac80211 to work with WPS.
>
With what kernel version? Do Broadcom wl or ndiswrapper drivers use mac80211?