EAP: buildIdentity: configuration was not available; any suggestion?
Pongsak Tawankanjanachot
egapongsak
Wed Jun 10 01:21:18 PDT 2009
Hi,
According to the case, we can reproduce by this way too.
1) start wpa_supplicant at the STA first. It will keep scanning for
suitable AP.
2) turn on the configured AP (I use 3Com WL524)
3) wpa_supplicant keeps showing this message
Try to find non-WPA AP
Already associated with the selected AP.
EAPOL: startWhen --> 0
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: txStart
TX EAPOL - hexdump(len=4): 01 01 00 00
RX EAPOL from 00:18:6e:c4:29:0f
RX EAPOL - hexdump(len=9): 01 00 00 05 01 00 00 05 01
Setting authentication timeout: 10 sec 0 usec
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_PAE entering state RESTART
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=0 method=1 vendor=0 vendorMethod=0
EAP: EAP entering state IDENTITY
CTRL-EVENT-EAP-STARTED EAP authentication started
EAP: EAP-Request Identity data - hexdump_ascii(len=0):
EAP: buildIdentity: configuration was not available
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
RX EAPOL from 00:18:6e:c4:29:0f
RX EAPOL - hexdump(len=9): 01 00 00 05 01 00 00 05 01
EAPOL: Received EAP-Packet frame
RX EAPOL from 00:18:6e:c4:29:0f
RX EAPOL - hexdump(len=9): 01 00 00 05 01 00 00 05 01
EAPOL: Received EAP-Packet frame
RX EAPOL from 00:18:6e:c4:29:0f
RX EAPOL - hexdump(len=9): 01 00 00 05 01 00 00 05 01
EAPOL: Received EAP-Packet frame
Authentication with 00:18:6e:c4:29:0f timed out.
wpa_driver_ralink_get_bssid
wpa_driver_ralink_get_associnfo
wpa_driver_ralink_get_associnfo: association success
wpa_driver_ralink_poll_timeout: Connected!!
wpa_driver_ralink_get_bssid
State: SCANNING -> ASSOCIATED
wpa_driver_ralink_get_bssid
Associated with 00:18:6e:c4:29:0f
WPA: Association event - clear replay counter
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portValid=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: SUPP_BE entering state IDLE
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
Setting authentication timeout: 10 sec 0 usec
Cancelling scan request
RX EAPOL from 00:18:6e:c4:29:0f
RX EAPOL - hexdump(len=9): 01 00 00 05 01 00 00 05 01
Setting authentication timeout: 10 sec 0 usec
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_PAE entering state RESTART
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=0 method=1 vendor=0 vendorMethod=0
EAP: EAP entering state IDENTITY
CTRL-EVENT-EAP-STARTED EAP authentication started
EAP: EAP-Request Identity data - hexdump_ascii(len=0):
EAP: buildIdentity: configuration was not available
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: startWhen --> 0
wpa_driver_ralink_event_receive
h: - hexdump(len=108): 6c 00 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00
00 01 00 04 00 00 00 03 10 00 00 00 00 00 00 49 00 0b 00 45 00 02 8c 00 00
00 00 39 00 03 01 41 53 53 4f 43 49 4e 46 4f 5f 52 65 71 49 45 73 3d 00 06
41 57 5f 46 48 4f 01 08 82 84 8b 96 8c 98 b0 48 30 14 01 00 00 0f ac 04 01
00 00 0f ac 04 01 00 00 0f ac 01 00 00 00 00 00
wpa_driver_ralink_event_rtm_newlink
ifi: - hexdump(len=16): 00 00 01 00 04 00 00 00 03 10 00 00 00 00 00 00
attrlen=92
attr1: - hexdump(len=4): 49 00 0b 00
attr2: - hexdump(len=4): 49 00 0b 00
rta_type=0b
wpa_driver_ralink_event_wireless
Wireless event: cmd=0x8c02 len=69
Custom wireless event: receive ReqIEs !!!
attr3: - hexdump(len=4): 00 00 00 00
RX EAPOL from 00:18:6e:c4:29:0f
RX EAPOL - hexdump(len=9): 01 00 00 05 01 00 00 05 01
EAPOL: Received EAP-Packet frame
wpa_driver_ralink_event_receive
h: - hexdump(len=104): 68 00 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00
20 01 00 04 00 00 00 03 10 00 00 00 00 00 00 47 00 0b 00 43 00 02 8c 00 00
00 00 37 00 04 01 20 52 65 73 70 49 45 73 3d 01 08 82 84 8b 96 8c 98 b0 48
30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 01 01 00 dd 0c 00
03 7f 02 01 01 00 00 02 a3 40 00 8c
wpa_driver_ralink_event_rtm_newlink
ifi: - hexdump(len=16): 00 20 01 00 04 00 00 00 03 10 00 00 00 00 00 00
attrlen=88
attr1: - hexdump(len=4): 47 00 0b 00
attr2: - hexdump(len=4): 47 00 0b 00
rta_type=0b
wpa_driver_ralink_event_wireless
Wireless event: cmd=0x8c02 len=67
Custom wireless event: receive RespIEs !!!
attr3: - hexdump(len=4): 00 00 00 00
wpa_driver_ralink_event_receive
h: - hexdump(len=48): 30 00 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00
01 00 04 00 00 00 03 10 00 00 00 00 00 00 10 00 0b 00 0c 00 02 8c 00 00 00
00 00 00 05 01
wpa_driver_ralink_event_rtm_newlink
ifi: - hexdump(len=16): 00 00 01 00 04 00 00 00 03 10 00 00 00 00 00 00
attrlen=32
attr1: - hexdump(len=4): 10 00 0b 00
attr2: - hexdump(len=4): 10 00 0b 00
rta_type=0b
wpa_driver_ralink_event_wireless
Wireless event: cmd=0x8c02 len=12
Custom wireless event: receive ASSOCINFO_EVENT !!!
wpa_driver_ralink_event_wireless_custom
Custom wireless event: 'ASSOCINFO_ReqIEs='
Association info event
req_ies - hexdump(len=112): 00 06 41 57 5f 46 48 4f 01 08 82 84 8b 96 8c 98
b0 48 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 20
52 65 73 70 49 45 73 3d 01 08 82 84 8b 96 8c 98 b0 48 30 14 01 00 00 0f ac
04 01 00 00 0f ac 04 01 00 00 0f ac 01 01 00 dd 0c 00 03 7f 02 01 01 00 00
02 a3 40 00 00 00 00 00 79 00 00 00 00 06 41 57 5f 46 48 4f 01
WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00
0f ac 04 01 00 00 0f ac 01 00 00
attr3: - hexdump(len=4): 20 52 65 73
wpa_driver_ralink_event_receive
h: - hexdump(len=48): 30 00 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00 b8
01 00 04 00 00 00 03 10 00 00 00 00 00 00 10 00 0b 00 0c 00 02 8c 00 00 00
00 00 00 01 01
wpa_driver_ralink_event_rtm_newlink
ifi: - hexdump(len=16): 00 b8 01 00 04 00 00 00 03 10 00 00 00 00 00 00
attrlen=32
attr1: - hexdump(len=4): 10 00 0b 00
attr2: - hexdump(len=4): 10 00 0b 00
rta_type=0b
wpa_driver_ralink_event_wireless
Wireless event: cmd=0x8c02 len=12
Custom wireless event: receive ASSOCIATED_EVENT !!!
wpa_driver_ralink_get_bssid
State: ASSOCIATED -> ASSOCIATED
wpa_driver_ralink_get_bssid
Associated with 00:18:6e:c4:29:0f
WPA: Association event - clear replay counter
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portValid=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: SUPP_BE entering state IDLE
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
Setting authentication timeout: 10 sec 0 usec
Cancelling scan request
attr3: - hexdump(len=4): 20 52 65 73
RX EAPOL from 00:18:6e:c4:29:0f
RX EAPOL - hexdump(len=9): 01 00 00 05 01 00 00 05 01
Setting authentication timeout: 10 sec 0 usec
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_PAE entering state RESTART
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=0 method=1 vendor=0 vendorMethod=0
EAP: EAP entering state IDENTITY
CTRL-EVENT-EAP-STARTED EAP authentication started
EAP: EAP-Request Identity data - hexdump_ascii(len=0):
EAP: buildIdentity: configuration was not available
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: startWhen --> 0
RX EAPOL from 00:18:6e:c4:29:0f
RX EAPOL - hexdump(len=9): 01 00 00 05 01 00 00 05 01
EAPOL: Received EAP-Packet frame
RX EAPOL from 00:18:6e:c4:29:0f
RX EAPOL - hexdump(len=9): 01 00 00 05 01 00 00 05 01
EAPOL: Received EAP-Packet frame
RX EAPOL from 00:18:6e:c4:29:0f
RX EAPOL - hexdump(len=9): 01 00 00 05 01 00 00 05 01
EAPOL: Received EAP-Packet frame
Authentication with 00:18:6e:c4:29:0f timed out.
wpa_driver_ralink_get_bssid
wpa_driver_ralink_get_associnfo
wpa_driver_ralink_get_associnfo: association success
wpa_driver_ralink_poll_timeout: Connected!!
wpa_driver_ralink_get_bssid
State: SCANNING -> ASSOCIATED
wpa_driver_ralink_get_bssid
Associated with 00:18:6e:c4:29:0f
WPA: Association event - clear replay counter
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portValid=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: SUPP_BE entering state IDLE
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
Setting authentication timeout: 10 sec 0 usec
Cancelling scan request
Here is my wpa_supplicant.conf
ctrl_interface=/var/run/wpa_supplicant
eapol_version=1
ap_scan=1
network={
ssid="AW_FHO"
key_mgmt=WPA-EAP IEEE8021X
pairwise=CCMP
eap=PEAP
phase1="peaplabel=0"
phase2="auth=MSCHAPV2"
identity="test"
password="test"
}
Pongsak
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20090610/bff1af15/attachment.htm
More information about the Hostap
mailing list