rt61 device works in master mode with hostapd 0.6.4 but not 0.6.7 or 0.7.0

[Cengiz Günay]

Thanks, then I'll pass the info to the rt2x00 people.

-Cengiz

On Sat, Jan 31, 2009 at 3:52 PM, Jouni Malinen <j at w1.fi> wrote:

> On Sat, Jan 31, 2009 at 03:39:06PM -0500, Cengiz G?nay wrote:
>
> > I have been using hostapd 0.6.4 for my rt61 PCI device since about
> October
> > with no problems. Recently I upgraded both the kernel drivers for rt2x00
> and
> > hostapd and I can no longer get the master mode working. I would
> appreciate
> > if you have any insights on how I can upgrade to recent versions of
> hostapd
> > without breaking my configuration.
>
> It looks like the new driver does not report TX status for management
> frames sent by hostapd. This is required to be able to implement
> association processing correctly in AP mode.
>
> --
> Jouni Malinen                                            PGP id EFC895FA
> _______________________________________________
> HostAP mailing list
> HostAP at lists.shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20090131/2218c1de/attachment-0001.htm