hostapd 0.6.7 with WPS support

[Andriy Tkachuk]

Hi Tom.

It looks like normal behavior, look at chapter 6.10.3. "EAP State 
Machine for Enrollee Registration" in Wi-Fi's WPS spec. Do you have some 
problems with this?

    Andriy

On 2009-01-20 06:04, Tom Tang wrote:
> Hi,
>  
> I try to use WPS PBC mode to associate hostapd 0.6.7 from D-Link 
> USB WUA-1340
> adapter. It looks the WPS negotiation works well because the 
> "successful" messages
> are printed out from hostapd debug trace such as:
> ...
> WPS: Negotiation completed successfully
> Received new WPA/WPA2-PSK from WPS for STA 00:22:b0:6b:0a:32
> ...
>  
> From the D-Link utility side,  the pop-up window also shows:
> "Connection Established"
>  
> But, after that, hostapd sent "EAP-Failure" to terminate the connection.
> the hostapd debug trace looks like:
> ...
> EAP-WSC: WPS processing completed successfully - report EAP failure
> EAP-WSC: MSG -> FAIL
> EAP: EAP entering state SELECT_ACTION
> EAP: getDecision: method failed -> FAILURE
> EAP: EAP entering state FAILURE
> EAP: Building EAP-Failure (id=203)
> IEEE 802.1X: 00:22:b0:6b:0a:32 BE_AUTH entering state FAIL
> ...
>  
> Could anybody give me some clue?
> Your inputs are highly appreciated.
>  
> Thanks
>  
> -Tom
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> HostAP mailing list
> HostAP at lists.shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap
>