wpa_supplicant not working with speedport w303 accesspoint

[Jan Marc Hoffmann]

Hi Jouni,

i ve been following your tip and recorded the communication between the
ap and the client. Broadcasts and other communications are filtered out.

http://user.cs.tu-berlin.de/~exelnet/wlan-capture

here is the log:

CTRL-EVENT-SCAN-RESULTS
Trying to associate with 00:23:08:0b:26:72 (SSID='mywlan' freq=2452 MHz)
Associated with 00:23:08:0b:26:72
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
CTRL-EVENT-SCAN-RESULTS
Trying to associate with 00:23:08:0b:26:72 (SSID='mywlan' freq=2452 MHz)
Associated with 00:23:08:0b:26:72
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
CTRL-EVENT-SCAN-RESULTS
Trying to associate with 00:23:08:0b:26:72 (SSID='mywlan' freq=2452 MHz)
Associated with 00:23:08:0b:26:72
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
CTRL-EVENT-SCAN-RESULTS
Trying to associate with 00:23:08:0b:26:72 (SSID='mywlan' freq=2452 MHz)
Associated with 00:23:08:0b:26:72
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
CTRL-EVENT-SCAN-RESULTS
Trying to associate with 00:23:08:0b:26:72 (SSID='mywlan' freq=2452 MHz)
^CCTRL-EVENT-TERMINATING - signal 2 received

thanks

Jan Marc Hoffmann



Jouni Malinen schrieb:
> On Tue, Feb 24, 2009 at 11:15:08AM +0100, Jan Marc Hoffmann wrote:
>> My wlan is working just fine with other APs and with this AP under  
>> windows. It's not working under linux. I tried two different computers.  
>> (2200bg 29** intel)
> 
>> The wpa_supplicant errorlog:
> 
>> Associated to a new BSS: BSSID=00:23:08:0b:26:72
> 
> ...
> 
>> RTM_NEWLINK, IFLA_IFNAME: Interface 'eth0' added
>> Wireless event: cmd=0x8b15 len=20
>> Wireless event: new AP: 00:00:00:00:00:00
>> Setting scan request: 0 sec 100000 usec
>> Added BSSID 00:23:08:0b:26:72 into blacklist
>> CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
> 
> 
>> Im using the latest cvs version 0.7.0 of wpa_supplicant. Any idea how to  
>> solve this problem?
> 
> The debug log seems to indicate that wpa_supplicant did not receive
> any EAPOL frames from the AP as would have been expected here.
> Consequently, there is not really much that can be debugged at this
> level and one would likely need to take a look at how the driver is
> behaving. Would you be able to use the other computer as a wireless
> sniffer and capture the frames exchanged between the AP and the client
> (e.g., with wireshark)?
> 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 3254 bytes
Desc: S/MIME Cryptographic Signature
Url : http://lists.shmoo.com/pipermail/hostap/attachments/20090226/d6519788/attachment.bin