rt61 device works in master mode with hostapd 0.6.4 but not 0.6.7 or 0.7.0

[Cengiz Günay]

On Mon, Feb 16, 2009 at 4:05 PM, Cengiz G?nay <cengique at gmail.com> wrote:

> I'll hopefully report success next time I write.


Yes, it works now, even with WPA2! It probably worked even yesterday, but I
ran out of time checking it. Sorry, I was wrong about forgetting to compile
the nl80211 driver into hostapd. The problem must have been my older
installation of udev. It didn't even have the udevadm command. I got the
hint about udev from the post by  Luis Rodriguez on Feb 14th to thread
"wpa_supplicant/ath5k won't detect hidden SSID when
CONFIG_WIRELESS_OLD_REGULATORY disabled".
<http://rt2x00.serialmonkey.com/phpBB/viewtopic.php?f=5&t=4963&p=32214&hilit=crda+udev#p32214>

I now have udev  0.125-7 installed + crda. I'm not sure if crda is
necessary. After installing these programs, I get the allowed channels list
with hostapd 0.7.0:

Configuration file: /etc/hostapd/hostapd-crda.conf
ctrl_interface_group=0
Opening raw packet socket for ifindex -1
BSS count 1, BSSID mask ff:ff:ff:ff:ff:ff (0 bits)
SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf
nl80211: Added 802.11b mode based on 802.11g information
Allowed channel: mode=1 chan=1 freq=2412 MHz max_tx_power=4 dBm
Allowed channel: mode=1 chan=2 freq=2417 MHz max_tx_power=4 dBm
Allowed channel: mode=1 chan=3 freq=2422 MHz max_tx_power=4 dBm
Allowed channel: mode=1 chan=4 freq=2427 MHz max_tx_power=4 dBm
Allowed channel: mode=1 chan=5 freq=2432 MHz max_tx_power=5 dBm
Allowed channel: mode=1 chan=6 freq=2437 MHz max_tx_power=5 dBm
Allowed channel: mode=1 chan=7 freq=2442 MHz max_tx_power=5 dBm
Allowed channel: mode=1 chan=8 freq=2447 MHz max_tx_power=5 dBm
Allowed channel: mode=1 chan=9 freq=2452 MHz max_tx_power=6 dBm
Allowed channel: mode=1 chan=10 freq=2457 MHz max_tx_power=6 dBm
Allowed channel: mode=1 chan=11 freq=2462 MHz max_tx_power=6 dBm
Allowed channel: mode=0 chan=1 freq=2412 MHz max_tx_power=4 dBm
Allowed channel: mode=0 chan=2 freq=2417 MHz max_tx_power=4 dBm
Allowed channel: mode=0 chan=3 freq=2422 MHz max_tx_power=4 dBm
Allowed channel: mode=0 chan=4 freq=2427 MHz max_tx_power=4 dBm
Allowed channel: mode=0 chan=5 freq=2432 MHz max_tx_power=5 dBm
Allowed channel: mode=0 chan=6 freq=2437 MHz max_tx_power=5 dBm
Allowed channel: mode=0 chan=7 freq=2442 MHz max_tx_power=5 dBm
Allowed channel: mode=0 chan=8 freq=2447 MHz max_tx_power=5 dBm
Allowed channel: mode=0 chan=9 freq=2452 MHz max_tx_power=6 dBm
Allowed channel: mode=0 chan=10 freq=2457 MHz max_tx_power=6 dBm
Allowed channel: mode=0 chan=11 freq=2462 MHz max_tx_power=6 dBm
...

Thanks again for helping and working on hostapd! Let me know if I can
provide any more explanation.

-- Cengiz
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20090217/de9499aa/attachment.htm