wpa_supplicant/ath5k won't detect hidden SSID when CONFIG_WIRELESS_OLD_REGULATORY disabled
Fiouz
fiouzy
Sat Feb 14 10:26:38 PST 2009
Hi,
Running wpa_supplicant 0.6.7 with the latest compat-wireless package
(2009-02-14), I can't connect to my hidden SSID when I comment-out the
CONFIG_WIRELESS_OLD_REGULATORY option from config.mk.
The driver is ath5k and I have CRDA and the regulatory database loaded
as shown in dmesg:
[21171.159156] cfg80211: Calling CRDA to update world regulatory domain
[21179.832206] cfg80211: Calling CRDA for country: US
wpa_supplicant is configured with ap_scan=1 and my network block has
scan_ssid=1. Setting ap_scan=2 does not help.
I don't know where to look for a fix, since I'm unsure whether it's
wpa_supplicant's, ath5k's or mac80211's error.
Any pointer would be appreciated. Thanks.
Here is the -d output (with irrelevant BSSID removed, mine being
e2:f3:9d:d8:76:f4):
Initializing interface 'wlan0' conf
'/etc/wpa_supplicant/wpa_supplicant.conf' driver 'wext' ctrl_interface
'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' ->
'/etc/wpa_supplicant/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'
ctrl_interface='DIR=/var/run/wpa_supplicant GROUP=wheel'
eapol_version=2
ap_scan=1
Priority group 0
id=0 ssid='Orbitrap'
Initializing interface (2) 'wlan0'
Interface wlan0 set UP - waiting a second for the driver to complete
initialization
SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf flags 0x0
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: XXX
wpa_driver_wext_set_wpa
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
wpa_driver_wext_set_drop_unencrypted
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
Using existing control interface directory.
ctrl_interface_group=10 (from group name 'wheel')
Added interface wlan0
Ignore event for foreign ifindex 16
RTM_NEWLINK: operstate=0 ifi_flags=0x1043 ([UP][RUNNING])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
State: DISCONNECTED -> SCANNING
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=8):
4f 72 62 69 74 72 61 70 Orbitrap
Trying to get current scan results first without requesting a new scan
to speed up initial association
Received 0 bytes of scan results (0 BSSes)
Cached scan results are empty - not posting
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 0 sec 0 usec
Starting AP scan (broadcast SSID)
Scan requested (ret=0) - scan timeout 5 seconds
EAPOL: disable timer tick
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Wireless event: cmd=0x8b19 len=8
Received 4075 bytes of scan results (11 BSSes)
CTRL-EVENT-SCAN-RESULTS
Selecting BSS from priority group 0
Try to find WPA-enabled AP
3: e2:f3:9d:d8:76:f4 ssid='' wpa_ie_len=26 rsn_ie_len=0 caps=0x11
skip - SSID mismatch
skip - disabled
skip - disabled
skip - disabled
skip - SSID mismatch
Try to find non-WPA AP
3: e2:f3:9d:d8:76:f4 ssid='' wpa_ie_len=26 rsn_ie_len=0 caps=0x11
skip - SSID mismatch
skip - disabled
skip - disabled
skip - disabled
skip - SSID mismatch
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=8):
4f 72 62 69 74 72 61 70 Orbitrap
Scan requested (ret=0) - scan timeout 30 seconds
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Wireless event: cmd=0x8b19 len=8
Scan results did not fit - trying larger buffer (8192 bytes)
Received 4846 bytes of scan results (13 BSSes)
CTRL-EVENT-SCAN-RESULTS
Selecting BSS from priority group 0
Try to find WPA-enabled AP
7: e2:f3:9d:d8:76:f4 ssid='' wpa_ie_len=26 rsn_ie_len=0 caps=0x11
skip - SSID mismatch
skip - disabled
skip - disabled
skip - disabled
skip - SSID mismatch
Try to find non-WPA AP
7: e2:f3:9d:d8:76:f4 ssid='' wpa_ie_len=26 rsn_ie_len=0 caps=0x11
skip - SSID mismatch
skip - disabled
skip - disabled
skip - disabled
skip - SSID mismatch
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Scan requested (ret=0) - scan timeout 30 seconds
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Wireless event: cmd=0x8b19 len=8
Scan results did not fit - trying larger buffer (8192 bytes)
Received 6176 bytes of scan results (17 BSSes)
CTRL-EVENT-SCAN-RESULTS
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: e2:f3:9d:d8:76:f4 ssid='' wpa_ie_len=26 rsn_ie_len=0 caps=0x11
skip - SSID mismatch
skip - disabled
skip - disabled
skip - disabled
skip - SSID mismatch
Try to find non-WPA AP
0: e2:f3:9d:d8:76:f4 ssid='' wpa_ie_len=26 rsn_ie_len=0 caps=0x11
skip - SSID mismatch
skip - disabled
skip - disabled
skip - disabled
skip - SSID mismatch
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=8):
4f 72 62 69 74 72 61 70 Orbitrap
Scan requested (ret=0) - scan timeout 30 seconds
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Wireless event: cmd=0x8b19 len=8
Scan results did not fit - trying larger buffer (8192 bytes)
Received 6458 bytes of scan results (18 BSSes)
CTRL-EVENT-SCAN-RESULTS
If I bring back CONFIG_WIRELESS_OLD_REGULATORY=y, wpa_supplicant is
able to connect to detect my SSID:
Initializing interface 'wlan0' conf
'/etc/wpa_supplicant/wpa_supplicant.conf' driver 'wext' ctrl_interface
'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' ->
'/etc/wpa_supplicant/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'
ctrl_interface='DIR=/var/run/wpa_supplicant GROUP=wheel'
eapol_version=2
ap_scan=1
Priority group 0
id=0 ssid='Orbitrap'
Initializing interface (2) 'wlan0'
Interface wlan0 set UP - waiting a second for the driver to complete
initialization
SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf flags 0x0
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: XXX
wpa_driver_wext_set_wpa
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
wpa_driver_wext_set_drop_unencrypted
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
Using existing control interface directory.
ctrl_interface_group=10 (from group name 'wheel')
Added interface wlan0
Ignore event for foreign ifindex 14
RTM_NEWLINK: operstate=0 ifi_flags=0x1043 ([UP][RUNNING])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
State: DISCONNECTED -> SCANNING
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=8):
4f 72 62 69 74 72 61 70 Orbitrap
Trying to get current scan results first without requesting a new scan
to speed up initial association
Received 0 bytes of scan results (0 BSSes)
Cached scan results are empty - not posting
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 0 sec 0 usec
Starting AP scan (broadcast SSID)
Scan requested (ret=0) - scan timeout 5 seconds
EAPOL: disable timer tick
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Wireless event: cmd=0x8b19 len=8
Received 3899 bytes of scan results (10 BSSes)
CTRL-EVENT-SCAN-RESULTS
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=8):
4f 72 62 69 74 72 61 70 Orbitrap
Scan requested (ret=0) - scan timeout 30 seconds
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Wireless event: cmd=0x8b19 len=8
Received 2590 bytes of scan results (8 BSSes)
CTRL-EVENT-SCAN-RESULTS
Selecting BSS from priority group 0
Try to find WPA-enabled AP
3: e2:f3:9d:d8:76:f4 ssid='' wpa_ie_len=26 rsn_ie_len=0 caps=0x11
skip - SSID mismatch
skip - disabled
skip - disabled
skip - disabled
skip - SSID mismatch
4: e2:f3:9d:d8:76:f4 ssid='Orbitrap' wpa_ie_len=26 rsn_ie_len=0 caps=0x11
selected based on WPA IE
selected WPA AP e2:f3:9d:d8:76:f4 ssid='Orbitrap'
Trying to associate with e2:f3:9d:d8:76:f4 (SSID='Orbitrap' freq=2422 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
Overriding auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 1
WPA: set AP WPA IE - hexdump(len=28): dd 1a 00 50 f2 01 01 00 00 50 f2
02 02 00 00 50 f2 02 00 50 f2 04 01 00 00 50 f2 02
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00
00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5e2:f3:9d:d8:76:f4
wpa_driver_wext_associate
wpa_driver_wext_set_psk
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Wireless event: cmd=0x8b04 len=12
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Wireless event: cmd=0x8c02 len=167
Association info event
req_ies - hexdump(len=50): 00 08 4f 72 62 69 74 72 61 70 01 08 02 04
0b 16 0c 12 18 24 32 04 30 48 60 6c dd 16 00 50 f2 01 01 00 00 50 f2
02 01 00 00 50 f2 04 01 00 00 50 f2 02
resp_ies - hexdump(len=16): 01 04 82 84 8b 96 32 08 0c 12 18 24 30 48 60 6c
WPA: set own WPA/RSN IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00
50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: e2:f3:9d:d8:76:f4
State: ASSOCIATING -> ASSOCIATED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
Associated to a new BSS: BSSID=e2:f3:9d:d8:76:f4
No keys have been configured - skip key clearing
Associated with e2:f3:9d:d8:76:f4
WPA: Association event - clear replay counter
WPA: Clear old PTK
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: enable timer tick
EAPOL: SUPP_BE entering state IDLE
Setting authentication timeout: 10 sec 0 usec
Cancelling scan request
RX EAPOL from e2:f3:9d:d8:76:f4
Setting authentication timeout: 10 sec 0 usec
IEEE 802.1X RX: version=1 type=3 length=95
EAPOL-Key type=254
key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack)
key_length=16 key_data_length=0
replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 71
key_nonce - hexdump(len=32): b8 88 e8 92 ea 72 ed 4c e0 a3 f6 45 f3
b0 b4 8d 7b 68 35 6d d5 a5 c2 b1 c9 26 16 23 fa 4d 34 d4
key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
State: ASSOCIATED -> 4WAY_HANDSHAKE
WPA: RX message 1 of 4-Way Handshake from e2:f3:9d:d8:76:f4 (ver=2)
WPA: Renewed SNonce - hexdump(len=32): eb 04 7a 58 26 a7 ab 81 68 90
25 2f 85 ab 20 94 35 db 43 ed d2 92 68 4c f3 0e 6b 02 7c 47 a5 b4
WPA: PTK derivation - A1=00:14:a4:39:3a:a7 A2=e2:f3:9d:d8:76:f4
WPA: PMK - hexdump(len=32): [REMOVED]
WPA: PTK - hexdump(len=64): [REMOVED]
WPA: WPA IE for msg 2/4 - hexdump(len=24): dd 16 00 50 f2 01 01 00 00
50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
WPA: Sending EAPOL-Key 2/4
RX EAPOL from e2:f3:9d:d8:76:f4
IEEE 802.1X RX: version=1 type=3 length=123
EAPOL-Key type=254
key_info 0x1ca (ver=2 keyidx=0 rsvd=0 Pairwise Install Ack MIC)
key_length=16 key_data_length=28
replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 72
key_nonce - hexdump(len=32): b8 88 e8 92 ea 72 ed 4c e0 a3 f6 45 f3
b0 b4 8d 7b 68 35 6d d5 a5 c2 b1 c9 26 16 23 fa 4d 34 d4
key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
key_mic - hexdump(len=16): df c9 59 b5 28 4c 3d a2 bb 56 09 52 31 ca 01 08
State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE
WPA: RX message 3 of 4-Way Handshake from e2:f3:9d:d8:76:f4 (ver=2)
WPA: IE KeyData - hexdump(len=28): dd 1a 00 50 f2 01 01 00 00 50 f2 02
02 00 00 50 f2 02 00 50 f2 04 01 00 00 50 f2 02
WPA: Sending EAPOL-Key 4/4
WPA: Installing PTK to the driver.
WPA: RSC - hexdump(len=6): 00 00 00 00 00 00
wpa_driver_wext_set_key: alg=3 key_idx=0 set_tx=1 seq_len=6 key_len=16
State: 4WAY_HANDSHAKE -> GROUP_HANDSHAKE
RX EAPOL from e2:f3:9d:d8:76:f4
IEEE 802.1X RX: version=1 type=3 length=135
EAPOL-Key type=254
key_info 0x392 (ver=2 keyidx=1 rsvd=0 Group Ack MIC Secure)
key_length=32 key_data_length=40
replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 74
key_nonce - hexdump(len=32): ea 4d 21 e5 e0 c0 6c 4d 30 06 4d 19 63
7f 44 44 15 f9 a5 ef f6 ef 5d a9 79 59 2f 62 c0 99 4b a1
key_iv - hexdump(len=16): 15 f9 a5 ef 00 00 00 00 00 00 00 00 00 00 00 02
key_rsc - hexdump(len=8): 04 0e 00 00 00 00 00 00
key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
key_mic - hexdump(len=16): 7e a9 2f 8b 91 82 bd 7a 07 ac 91 63 e4 3c d0 52
WPA: RX message 1 of Group Key Handshake from e2:f3:9d:d8:76:f4 (ver=2)
State: GROUP_HANDSHAKE -> GROUP_HANDSHAKE
WPA: Group Key - hexdump(len=32): [REMOVED]
WPA: Installing GTK to the driver (keyidx=1 tx=0 len=32).
WPA: RSC - hexdump(len=6): 04 0e 00 00 00 00
wpa_driver_wext_set_key: alg=2 key_idx=1 set_tx=0 seq_len=6 key_len=32
WPA: Sending EAPOL-Key 2/2
WPA: Key negotiation completed with e2:f3:9d:d8:76:f4 [PTK=CCMP GTK=TKIP]
Cancelling authentication timeout
State: GROUP_HANDSHAKE -> COMPLETED
CTRL-EVENT-CONNECTED - Connection to e2:f3:9d:d8:76:f4 completed
(auth) [id=0 id_str=Freebox]
wpa_driver_wext_set_operstate: operstate 0->1 (UP)
WEXT: Operstate: linkmode=-1, operstate=6
EAPOL: External notification - portValid=1
EAPOL: External notification - EAP success=1
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state SUCCESS
EAP: EAP entering state DISABLED
EAPOL: SUPP_PAE entering state AUTHENTICATED
EAPOL: SUPP_BE entering state IDLE
EAPOL authentication completed successfully
RTM_NEWLINK: operstate=1 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
EAPOL: startWhen --> 0
EAPOL: disable timer tick
--
Fiouz
More information about the Hostap
mailing list