WPA_Supplicant failing for LEAP

[linux newbie]

Thanks for your reply.

Is wpa_supplicant + airo driver + LEAP tested??

How to check whether LEAP is enabled in my airo driver or not? Is there any
modules that needs to be integrated with airo driver for LEAP support?

Once again thanks in heaps

On Sun, Apr 26, 2009 at 5:59 PM, Jouni Malinen <j at w1.fi> wrote:

> On Mon, Apr 20, 2009 at 10:35:04AM +1000, linux newbie wrote:
>
> > Our AP is connected to Radius Server and LEAP is enabled. when I tried
> using
> > wpa_supplicant in my sytem(cisco wireless card and wext driver) it throws
> > following error. Please help to resolve this issue.
> > *wpa_driver_wext_associate
> > ioctl[SIOCSIWGENIE]: Operation not supported*
>
> You can ignore that message.
>
> > network={
> >         ssid="RTSDEV4"
> >         key_mgmt=IEEE8021X
> >         eap=LEAP
> >         identity="nandaks"
> >         password="*******"
> >         priority=5
> > }
>
> But it looks like your driver does not support Network EAP
> authentication algorithm. If the AP allows LEAP to be used without it,
> you could try adding auth_alg=OPEN into the network block.
>
> --
> Jouni Malinen                                            PGP id EFC895FA
> _______________________________________________
> HostAP mailing list
> HostAP at lists.shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20090427/7851e57d/attachment.htm