Set SSID=hex doesn't work
Pongsak Tawankanjanachot
egapongsak
Thu Apr 9 17:19:33 PDT 2009
Hi
Thank you for your suggestion. I've tried that, but the result is the
same. No suitable AP found.
wpa_supplicant.conf
ctrl_interface=/var/run/wpa_supplicant
eapol_version=1
ap_scan=1
network={
ssid=001a4d2f872c
key_mgmt=WPA-EAP IEEE8021X
pairwise=CCMP
eap=PEAP
phase1="peaplabel=0"
phase2="auth=MSCHAPV2"
identity="test"
password="test"
}
HERE is result from -dd option.
# Initializing interface 'ra0' conf '/jffs2/wpa_supplicant.conf' driver
'ralink' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/jffs2/wpa_supplicant.conf' ->
'/jffs2/wpa_supplicant.conf'
Reading configuration file '/jffs2/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
eapol_version=1
ap_scan=1
Line: 4 - start of a new network block
ssid - hexdump_ascii(len=6):
00 1a 4d 2f 87 2c __M/_,
key_mgmt: 0x9
pairwise: 0x10
eap methods - hexdump(len=16): 00 00 00 00 19 00 00 00 00 00 00 00 00 00 00
00
phase1 - hexdump_ascii(len=11):
70 65 61 70 6c 61 62 65 6c 3d 30 peaplabel=0
phase2 - hexdump_ascii(len=13):
61 75 74 68 3d 4d 53 43 48 41 50 56 32 auth=MSCHAPV2
identity - hexdump_ascii(len=4):
74 65 73 74 test
password - hexdump_ascii(len=4): [REMOVED]
Priority group 0
id=0 ssid=''
Initializing interface (2) 'ra0'
EAPOL: SUPP_PAE entering state DISCONNECTED
........
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: 00:1a:4d:2f:87:2c ssid='TEST' wpa_ie_len=0 rsn_ie_len=22 caps=0x411
skip - SSID mismatch
Try to find non-WPA AP
0: 00:1a:4d:2f:87:2c ssid='TEST' wpa_ie_len=0 rsn_ie_len=22 caps=0x411
skip - SSID mismatch
No suitable AP found.
I also try ssid="001a4d2f872c", but wpa is looking for a text ssid as
"001a4d2f872c" (which my AP SSID is "TEST").
Best regards,
Pongsak
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20090410/14665e1d/attachment.htm
More information about the Hostap
mailing list