integrated eap server
ali asin
ali.asin
Wed May 14 07:32:33 PDT 2008
Thanks for your help,
the output of wpa_supplicant is:
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
eapol_version=2
Line: 3 - start of a new network block
ssid - hexdump_ascii(len=6):
70 72 75 65 62 61 prueba
priority=5 (0x5)
proto: 0x2
key_mgmt: 0x1
eap methods - hexdump(len=16): 00 00 00 00 0d 00 00 00 00 00 00 00 00 00 00
00
pairwise: 0x8
group: 0x8
identity - hexdump_ascii(len=19):
61 6c 69 63 69 61 40 6c 69 62 65 6c 69 75 6d 2e cucu at test.
63 6f 6d com
ca_cert - hexdump_ascii(len=19):
2f 65 74 63 2f 63 65 72 74 2f 63 61 6b 65 79 2e /etc/cert/cakey.
70 65 6d pem
client_cert - hexdump_ascii(len=46):
2f 68 6f 6d 65 2f 61 6c 69 2f 63 65 72 74 2f 64
65 6d 6f 43 41 2f 63 65 72 74 73 2f 61 6c 69 63
69 61 2f 6e 65 77 63 65 72 74 2e 70 65 6d newcert.pem
private_key_passwd - hexdump_ascii(len=12): [REMOVED]
Priority group 5
id=0 ssid='prueba'
Initializing interface (2) 'ath0'
Interface ath0 set UP - waiting a second for the driver to complete
initialization
SIOCGIWRANGE: WE(compiled)=22 WE(source)=13 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 00:0b:6b:80:c8:8e
wpa_driver_madwifi_del_key: keyidx=0
wpa_driver_madwifi_del_key: keyidx=1
wpa_driver_madwifi_del_key: keyidx=2
wpa_driver_madwifi_del_key: keyidx=3
wpa_driver_madwifi_set_countermeasures: enabled=0
wpa_driver_madwifi_set_drop_unencrypted: enabled=1
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
Added interface ath0
Ignore event for foreign ifindex 3
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b06 len=8
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Trying to get current scan results first without requesting a new scan to
speed up initial association
Received 1845 bytes of scan results (8 BSSes)
CTRL-EVENT-SCAN-RESULTS
Selecting BSS from priority group 5
Try to find WPA-enabled AP
0: 00:15:6d:63:a6:45 ssid='prueba' wpa_ie_len=26 rsn_ie_len=24 caps=0x11
selected based on RSN IE
selected WPA AP 00:15:6d:63:a6:45 ssid='prueba'
Try to find non-WPA AP
Trying to associate with 00:15:6d:63:a6:45 (SSID='prueba' freq=2437 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
RSN: using IEEE 802.11i/D9.0
WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 1 proto 2
WPA: set AP WPA IE - hexdump(len=28): dd 1a 00 50 f2 01 01 00 00 50 f2 02 02
00 00 50 f2 04 00 50 f2 02 01 00 00 50 f2 01
WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac
04 00 0f ac 02 01 00 00 0f ac 01 00 00
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT 802.1X
WPA: not using MGMT group cipher
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00
00 0f ac 02 01 00 00 0f ac 01 00 00
No keys have been configured - skip key clearing
wpa_driver_madwifi_set_drop_unencrypted: enabled=1
State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_madwifi_associate
ioctl[IEEE80211_IOCTL_SETMLME]: Invalid argument
wpa_driver_madwifi_associate: SETMLME[ASSOC] failed
Association request to the driver failed
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - portControl=Auto
RSN: Ignored PMKID candidate without preauth flag
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b1a len=14
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:15:6d:63:a6:45
State: ASSOCIATING -> ASSOCIATED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
Associated to a new BSS: BSSID=00:15:6d:63:a6:45
No keys have been configured - skip key clearing
Associated with 00:15:6d:63:a6:45
WPA: Association event - clear replay counter
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: SUPP_BE entering state IDLE
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
Setting authentication timeout: 10 sec 0 usec
Cancelling scan request
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
RX EAPOL from 00:15:6d:63:a6:45
RX EAPOL - hexdump(len=9): 02 00 00 05 01 c6 00 05 01
Setting authentication timeout: 70 sec 0 usec
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_PAE entering state RESTART
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=198 method=1 vendor=0 vendorMethod=0
EAP: EAP entering state IDENTITY
CTRL-EVENT-EAP-STARTED EAP authentication started
EAP: EAP-Request Identity data - hexdump_ascii(len=0):
EAP: using real identity - hexdump_ascii(len=19):
61 6c 69 63 69 61 40 6c 69 62 65 6c 69 75 6d 2e cucu at test.
63 6f 6d com
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL: dst=00:15:6d:63:a6:45
TX EAPOL - hexdump(len=28): 02 00 00 18 02 c6 00 18 01 61 6c 69 63 69 61 40
6c 69 62 65 6c 69 75 6d 2e 63 6f 6d
EAPOL: SUPP_BE entering state RECEIVE
RX EAPOL from 00:15:6d:63:a6:45
RX EAPOL - hexdump(len=10): 02 00 00 06 01 c7 00 06 0d 20
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=199 method=13 vendor=0 vendorMethod=0
EAP: EAP entering state GET_METHOD
EAP: Initialize selected EAP method: vendor 0 method 13 (TLS)
EAP-TLS: Private key not configured
EAP: Failed to initialize EAP method: vendor 0 method 13 (TLS)
EAP: Building EAP-Nak (requested type 13 vendor=0 method=0 not allowed)
EAP: allowed methods - hexdump(len=0):
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL: dst=00:15:6d:63:a6:45
TX EAPOL - hexdump(len=10): 02 00 00 06 02 c7 00 06 03 00
EAPOL: SUPP_BE entering state RECEIVE
RX EAPOL from 00:15:6d:63:a6:45
RX EAPOL - hexdump(len=8): 02 00 00 04 04 c7 00 04
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Failure
EAP: EAP entering state FAILURE
CTRL-EVENT-EAP-FAILURE EAP authentication failed
EAPOL: SUPP_PAE entering state HELD
EAPOL: SUPP_BE entering state RECEIVE
EAPOL: SUPP_BE entering state FAIL
EAPOL: SUPP_BE entering state IDLE
EAPOL authentication completed unsuccessfully
EAPOL: startWhen --> 0
EAPOL: authWhile --> 0
Best regards,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20080514/add86989/attachment-0001.htm
More information about the Hostap
mailing list