ioctl[SIOCSIWAUTH]: Operation not supported

[Marcin Niśkiewicz]

Hello
did everything like in documentation (i guess so) and i can't make my
wireless card work ...
i have gentoo , i installed

*  net-wireless/wpa_supplicant
      Latest version available: 0.5.10
      Latest version installed: 0.5.10
      Size of files: 703 kB
      Homepage:      http://hostap.epitest.fi/wpa_supplicant/
      Description:   IEEE 802.1X/WPA supplicant for secure wireless
transfers
      License:       || ( GPL-2 BSD )

*  net-wireless/iwl3945-ucode
      Latest version available: 2.14.1.5
      Latest version installed: 2.14.1.5
      Size of files: 64 kB
      Homepage:      http://intellinuxwireless.org/?p=iwlwifi
      Description:   Intel (R) PRO/Wireless 3945ABG Network Connection ucode
      License:       Intel

*  net-wireless/iwl4965-ucode
      Latest version available: 4.44.1.20
      Latest version installed: 4.44.1.20
      Size of files: 78 kB
      Homepage:      http://intellinuxwireless.org/?p=iwlwifi
      Description:   Intel (R) Wireless WiFi Link 4965AGN ucode
      License:       Intel

I have HP dv6635en
my card is shown in lspci like that:
02:00.0 Network controller: Intel Corporation Unknown device 4229 (rev 61)

Of course i compiled kernel properly (again I guess so)
lsmod shows:
iwl4965               195176  0
mac80211              119692  1 iwl4965
cfg80211               15056  1 mac80211

when i run :
wpa_supplicant -B -ieth1 -Dwext -c/etc/wpa_supplicant.conf
i get:
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 5 value 0x1 -

when i run:
wpa_supplicant -c/etc/wpa_supplicant.conf -ieth1 -d
Initializing interface 'eth1' conf '/etc/wpa_supplicant.conf' driver
'default' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group='wheel' (DEPRECATED)
update_config=0
fast_reauth=1
ap_scan=2
Priority group 0
   id=0 ssid='golecyce'
Initializing interface (2) 'eth1'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf
  capabilities: key_mgmt 0xf enc 0xf
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 00:1d:e0:04:c8:8f
wpa_driver_wext_set_wpa
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 4 value 0x0 - wpa_driver_wext_set_drop_unencrypted
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 5 value 0x1 - Setting scan request: 0 sec 100000 usec
Using existing control interface directory.
ctrl_interface_group=10 (from group name 'wheel')
Added interface eth1
RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
Wireless event: cmd=0x8b06 len=12
Ignore event for foreign ifindex 3
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
State: DISCONNECTED -> SCANNING
Trying to associate with SSID 'golecyce'
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: No WPA/RSN IE available from association info
WPA: Set cipher suites based on configuration
WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 1
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50
f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 5 value 0x1 - State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
Setting authentication timeout: 60 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b06 len=12
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b1a len=24
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b06 len=12


Could someone help me?

regards
nichu
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20080617/817e5947/attachment.htm