wpa_supplicant problem
Fernando
fbernal
Wed Jul 16 04:18:50 PDT 2008
Hi all,
Using WPA with KEY_MNGT=IEEE8021X and EAP-PEAP with MSCHAV2
authentication is successful,
EAP: Received EAP-Success
EAP: EAP entering state SUCCESS
CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfuly
EAPOL: SUPP_BE entering state RECEIVE
But this problem is showed after authentication:
EAPOL: Received EAPOL-Key frame
EAPOL: KEY_RX entering state KEY_RECEIVE
EAPOL: processKey
EAPOL: RX IEEE 802.1X ver=1 type=3 len=49 EAPOL-Key: type=1 key_length=5
key_index=0x1
EAPOL: Successfully fetched key (len=64)
EAPOL: EAPOL-Key key signature verified
EAPOL: Decrypted(RC4) key - hexdump(len=5): [REMOVED]
EAPOL: Setting dynamic WEP key: broadcast keyidx 1 len 5
wpa_driver_wext_set_key: alg=1 key_idx=1 set_tx=0 seq_len=0 key_len=5
ioctl[SIOCSIWENCODEEXT]: Operation not supported
Driver did not support SIOCSIWENCODEEXT, trying SIOCSIWENCODE
Any ideas?
Thanks,
Fernando.
More information about the Hostap
mailing list