Debug output from hostapd...

[john dowd]

I've been able to get the hostapd (a recent version from git 0..6.6)
and a very recent rt2x00 driver to run together on my target here. I
have not been able to see the Access Point that should be advertised
by the s/w. I have here the output from the hostapd debug (-dd)
option. I'm wondering if someone can spot why I have no access point
or am I in fact just not advertising it (the SSID).

Cheers!!

linux-ivvo:/etc/init.d # hostapd -dd /etc/hostapd.conf
Configuration file: /etc/hostapd.conf
ctrl_interface_group=0
Opening raw packet socket for ifindex 3304
BSS count 1, BSSID mask ff:ff:ff:ff:ff:ff (0 bits)
SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf
nl80211: Added 802.11b mode based on 802.11g information
Allowed channel: mode=1 chan=1 freq=2412 MHz max_tx_power=0 dBm
Allowed channel: mode=1 chan=2 freq=2417 MHz max_tx_power=0 dBm
Allowed channel: mode=1 chan=3 freq=2422 MHz max_tx_power=0 dBm
Allowed channel: mode=1 chan=4 freq=2427 MHz max_tx_power=0 dBm
Allowed channel: mode=1 chan=5 freq=2432 MHz max_tx_power=0 dBm
Allowed channel: mode=1 chan=6 freq=2437 MHz max_tx_power=0 dBm
Allowed channel: mode=1 chan=7 freq=2442 MHz max_tx_power=0 dBm
Allowed channel: mode=1 chan=8 freq=2447 MHz max_tx_power=0 dBm
Allowed channel: mode=1 chan=9 freq=2452 MHz max_tx_power=0 dBm
Allowed channel: mode=1 chan=10 freq=2457 MHz max_tx_power=0 dBm
Allowed channel: mode=1 chan=11 freq=2462 MHz max_tx_power=0 dBm
Allowed channel: mode=0 chan=1 freq=2412 MHz max_tx_power=1 dBm
Allowed channel: mode=0 chan=2 freq=2417 MHz max_tx_power=0 dBm
Allowed channel: mode=0 chan=3 freq=2422 MHz max_tx_power=0 dBm
Allowed channel: mode=0 chan=4 freq=2427 MHz max_tx_power=0 dBm
Allowed channel: mode=0 chan=5 freq=2432 MHz max_tx_power=0 dBm
Allowed channel: mode=0 chan=6 freq=2437 MHz max_tx_power=0 dBm
Allowed channel: mode=0 chan=7 freq=2442 MHz max_tx_power=0 dBm
Allowed channel: mode=0 chan=8 freq=2447 MHz max_tx_power=0 dBm
Allowed channel: mode=0 chan=9 freq=2452 MHz max_tx_power=0 dBm
Allowed channel: mode=0 chan=10 freq=2457 MHz max_tx_power=0 dBm
Allowed channel: mode=0 chan=11 freq=2462 MHz max_tx_power=0 dBm
RATE[0] rate=10 flags=0x2
RATE[1] rate=20 flags=0x6
RATE[2] rate=55 flags=0x6
RATE[3] rate=110 flags=0x6
RATE[4] rate=60 flags=0x0
RATE[5] rate=90 flags=0x0
RATE[6] rate=120 flags=0x0
RATE[7] rate=180 flags=0x0
RATE[8] rate=240 flags=0x0
RATE[9] rate=360 flags=0x0
RATE[10] rate=480 flags=0x0
RATE[11] rate=540 flags=0x0
Passive scanning not supported
Flushing old station entries
Deauthenticate all stations
Using interface wlan0 with hwaddr 00:22:b0:5e:50:ff and ssid 'Asterisk'
wlan0: Setup of interface done.
MGMT (TX callback) ACK
STA 00:0c:f1:4c:6c:4b sent probe request for broadcast SSID
MGMT (TX callback) fail
mgmt::proberesp cb
STA 00:23:12:92:e7:e2 sent probe request for broadcast SSID
MGMT (TX callback) fail
mgmt::proberesp cb
STA 00:0c:f1:4c:6c:4b sent probe request for broadcast SSID
MGMT (TX callback) fail
mgmt::proberesp cb
STA 00:21:5c:39:33:8f sent probe request for broadcast SSID
MGMT (TX callback) fail
mgmt::proberesp cb



-- 
                              John Dowd
                              jdowd at slashdevslashnull.org
                              133 Waverley St.
                              Ottawa Ont. K2P 0V3
                              Home: (613)234-7884
                              Cell: (613)316-7884