WiFi Protected Setup (WPS) update

[Chuck Tuffli]

The intent is to get this work merged into the 0.6.x branch, but since I
started with the 0.5.x code, I wanted to get that completed and working
before moving to the current code. With any luck, I should be able to
start porting this to 0.6.x by the end of the month.
 
---chuck


________________________________

	From: hostap-bounces at lists.shmoo.com
[mailto:hostap-bounces at lists.shmoo.com] On Behalf Of Bjarke Istrup
Pedersen
	Sent: Friday, August 15, 2008 11:51 AM
	To: hostap at lists.shmoo.com
	Subject: Re: WiFi Protected Setup (WPS) update
	
	
	I've been following this for a while, but there is one thing
that I haven't been able to figure out.
	Is your work going to be imported into hostapd once you are
done, or are you just working on your own? :)
	
	
	2008/8/15 Chuck Tuffli <CTuffli at dspg.com>
	

		I have uploaded the latest patch against 0.5.10 that
finishes off most
		of the missing features. In addition to the DLink, this
code now works
		with the Netgear WNDR3300 as well as AP reference
designs from Atheros
		and Broadcom. There was also a minor change to the
network block that is
		described in the PDF. Changes include
		
		- Added UUID-E as a network block field
		- Added BSD driver support
		- Don't assume EAP-Failure always means success
		- Restructure BSS selection
		- Handle unaligned address correctly when parsing fields
		- Populate M1 message with information from wpa_ssid
struct
		- Add NACK creation and processing
		- Support both PSK and passphrase variants of the
network key element
		- Validate R-SNonce[12] elements
		- Validate Authenticator and Key Wrap Authenticator
elements
		- Validate correct decryption of AES-CBC with padding
		- Differentiate between syntactical errors and
authentication errors in
		message processing
		
		I had hoped this would be the final update before
porting this to the
		0.6.x code base, but external registrars have thrown a
kink in that
		plan. So look for one more 0.5.10 based patch next week.
As always, you
		can find the latest patch on SourceForge
		
	
http://sourceforge.net/project/showfiles.php?group_id=234447
		
		---chuck
		_______________________________________________
		HostAP mailing list
		HostAP at lists.shmoo.com
		http://lists.shmoo.com/mailman/listinfo/hostap
		



	
______________________________________________________________________
	DSP Group, Inc. automatically scans all emails and attachments
using MessageLabs Email Security System.
	
_____________________________________________________________________
	

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20080815/f9fc56e4/attachment.htm