Questions to configure dynamic wep in hostap.conf

[ambedkar ranganathan]

 ?
Hi,

It looks your hostap.conf is wrong.Since you use Dynamic WEP key,key management shouldn't be WPA-EAP.

ieee8021x=1
#wep_key_len_broadcast=5
#wep_key_len_unicast=5
# Rekeying period in seconds. 0 = do not rekey (i.e., set keys only once)
#wep_rekey_period=300
own_ip_addr=150.150.131.83
auth_server_addr=150.150.131.85
auth_server_port=1812
auth_server_shared_secret=1234567890
acct_server_addr=150.150.131.85
acct_server_port=1813
acct_server_shared_secret=1234567890
key_mgmt=IEEE8021X

Please try the above and let me know the RESULT.

Thanks
Ambedkar.R


On Mon, 17 Sep 2007 ?????? wrote :
>Hi all,
>
>Is there anybody to know how to configure dynamic wep on hostapd ? I changed /etc/hostapd.conf as the following ?
>
>~ # cat /etc/hostapd.conf
>##### hostapd configuration file ##############################################
>...
>ieee8021x=1
>#wep_key_len_broadcast=5
>#wep_key_len_unicast=5
># Rekeying period in seconds. 0 = do not rekey (i.e., set keys only once)
>#wep_rekey_period=300
>own_ip_addr=150.150.131.83
>auth_server_addr=150.150.131.85
>auth_server_port=1812
>auth_server_shared_secret=1234567890
>acct_server_addr=150.150.131.85
>acct_server_port=1813
>acct_server_shared_secret=1234567890
>wpa_key_mgmt=WPA-EAP
>wpa=1
>...
>
>
>With the above configuration, supplicant does not try to associate with ap because of key_mgmt mismatch. So I disabled 'wpa' and enabled 'wep_key_len_xxx' as the following with the others are same.
>
>...
>wep_key_len_broadcast=5
>wep_key_len_unicast=5
>...
>wpa=0
>
>However, in this case, segmentation fault of hostapd happens as the following.
>
>...
>wlan0: RADIUS Sending RADIUS message to accounting server
>RADIUS message: code=4 (Accounting-Request) identifier=0 length=80
>    Attribute 40 (Acct-Status-Type) length=6
>       Value: 8
>    Attribute 45 (Acct-Authentic) length=6
>       Value: 1
>    Attribute 4 (NAS-IP-Address) length=6
>       Value: 150.150.131.83
>    Attribute 30 (Called-Station-Id) length=36
>       Value: '00-40-5A-19-25-BF:myLGNet_bbelief2'
>    Attribute 49 (Acct-Terminate-Cause) length=6
>       Value: 11
>wlan0: RADIUS Next RADIUS client retransmit in 3 seconds
>
>ioctl[SIOCSIWGENIE]: Bad file descriptor
>len=0
>Could not remove generic information element from interface wlan1
>
>[1] + Segmentation fault         /usr/sbin/hostapd /etc/hostapd.conf /etc/hostap
>d-1.conf
>
>
>
>_______________________________________________
>HostAP mailing list
>HostAP at shmoo.com
>http://lists.shmoo.com/mailman/listinfo/hostap
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20070918/219ef753/attachment.htm