Hostapd gives error with Madwifi.conf file
maloomnahi at indiatimes.com
maloomnahi
Sun Sep 9 22:00:45 PDT 2007
Hi Nazeer,
Every PCI card for example AR5212 comes with a bridge interface to connecto the hardware. Mine is also a TPLINK PCI AR5212 chipset. So my CONF files always call for the bridge interface. Is it in anyway a compilation or .CONFIG file issue? Following are the modules added into the system
Module Size Used by
hostapd_cli.o 17792 0
sta_info.o 15744 0
ttls_openssl.o 5632 0
md5.o 8320 0
md4.o 8448 0
sha256.o 15360 0
ieee802_11_auth.o 5632 0
hostapd.o 5632 0
eap_ttls.o 5632 0
eap_tls_common.o 5632 0
eap_sim.o 5632 0
eap_psk.o 5632 0
eap_pax.o 5632 0
eap_maschapv2.o 5632 0
eap_md5.o 5632 0
eap_gtc.o 5632 0
eap_gpsk.o 5632 0
eap_gpsk_common.o 5632 0
eap_aka.o 5632 0
driver_madwifi.o 11392 0
crtl_iface.o 8832 0
crypto.o 31808 0
eap.o 5632 0
ieee802_1x.o 5632 0
ieee802_11.o 5632 0
preauth.o 5632 0
radius_client.o 5632 0
radius_server.o 5632 0
radius.o 5632 0
radius 5632 0
wme.o 31808 0
wpa_ctrl.o 31808 0
wpa.o 31808 0
aes_wrap.o 31936 0
des 21888 0
wlan_scan_ap 8832 0
wlan_xauth 5632 0
ieee80211 32712 0
ieee80211_crypt 9728 1 ieee80211
md5 8320 0
md4 8448 0
sha256 15360 0
wlan_acl 8192 0
wlan_wep 9984 0
wlan_ccmp 11392 0
wlan_tkip 15232 0
aes 31808 0
i915 23168 2
drm 72596 3 i915
autofs4 25604 2
hidp 24064 2
rfcomm 45976 0
l2cap 31744 10 hidp,rfcomm
bluetooth 58596 5 hidp,rfcomm,l2cap
sunrpc 158524 1
acpi_cpufreq 13188 0
freq_table 9984 1 acpi_cpufreq
dm_multipath 22536 0
video 20996 0
sbs 20288 0
i2c_ec 9344 1 sbs
button 11152 0
battery 14468 0
ac 9604 0
ipv6 266272 36
parport_pc 31268 1
lp 17096 0
parport 40648 2 parport_pc,lp
snd_intel8x0 36508 1
snd_ac97_codec 95136 1 snd_intel8x0
snd_ac97_bus 6656 1 snd_ac97_codec
snd_seq_dummy 8196 0
intel_rng 7168 0
snd_seq_oss 37248 0
snd_seq_midi_event 11904 1 snd_seq_oss
snd_seq 57072 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
wlan_scan_sta 17792 0
snd_seq_device 12556 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 46464 0
snd_mixer_oss 20736 1 snd_pcm_oss
ath_rate_sample 16512 1
sg 38684 0
snd_pcm 80388 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
serio_raw 11268 0
tg3 105348 0
ath_pci 97184 0
wlan 198724 36 hostapd_cli.o,sta_info.o,ttls_openssl.o,ieee802_11_auth.o,hostapd.o,eap_ttls.o,eap_tls_common.o,eap_sim.o,eap_psk.o,eap_pax.o,eap_maschapv2.o,eap_md5.o,eap_gtc.o,eap_gpsk.o,eap_gpsk_common.o,eap_aka.o,driver_madwifi.o,crtl_iface.o,eap.o,ieee802_1x.o,ieee802_11.o,preauth.o,radius_client.o,radius_server.o,radius.o,radius,wlan_scan_ap,wlan_xauth,wlan_acl,wlan_wep,wlan_ccmp,wlan_tkip,wlan_scan_sta,ath_rate_sample,ath_pci
Thanks
PPN
----- Original Message -----
From: Nazeer Khan <Nazeer.Khan at nicta.com.au>
To: maloomnahi at indiatimes.com
Cc: Nazeer Khan <nazeer.khan at nicta.com.au>, hostap at shmoo.com
Sent: Mon, 10 Sep 2007 10:18:24 +0530 (IST)
Subject: RE: Hostapd gives error with Madwifi.conf file
On Mon, September 10, 2007 2:47 pm, maloomnahi at indiatimes.com said:
> Hi Nazeer,
>
> I do not have a bridge interface, but as far as the documents related to
> hostpad-amdwifi are concerned they have asked to keep that in the CONF
> file. I have tried removing the bridge variable also, but no use. The
> error is the same.
With madwifi you need a bridge interface. It won't work without that.
>
> Thanks
> PPN
>
> ----- Original Message -----
> From: Nazeer Khan <Nazeer.Khan at nicta.com.au>
> To: maloomnahi at indiatimes.com
> Cc: Nazeer <nazeer.khan at nicta.com.au>, hostap at shmoo.com
> Sent: Mon, 10 Sep 2007 10:12:32 +0530 (IST)
> Subject: RE: Hostapd gives error with Madwifi.conf file
>
>
> On Mon, September 10, 2007 2:34 pm, maloomnahi at indiatimes.com said:
>> Hi Nazeer,
>>
>> Following was the result by using the same mentioned conf file
>>
>> [root at localhost hostapd-0.5.8]# hostapd -dd hostapd1.conf
>> Configuration file: hostapd1.conf
>> ctrl_interface_group=0
>> ioctl(SIOCGIFINDEX): No such device
>
> Do u have a bridge interface "br0" ?????
>
>> madwifi driver initialization failed.
>> eth1: Unable to setup interface.
>> Flushing old station entries
>> Deauthenticate all stations
>> rmdir[ctrl_interface]: No such file or directory
>>
>> Is the issue with the CONF / CONFIG file or some driver settings? Thanks
>> for everything ... in advance
>>
>> Regards
>> PPN
>>
>>
>> ----- Original Message -----
>> From: Nazeer <nazeer.khan at nicta.com.au>
>> To: maloomnahi at indiatimes.com
>> Cc: hostap at shmoo.com
>> Sent: Mon, 10 Sep 2007 09:20:10 +0530 (IST)
>> Subject: RE: Hostapd gives error with Madwifi.conf file
>>
>> Use the following config file and if you have any errors post them
>> here.....
>>
>> # Configuration File for WPA-PSK
>> interface=ath0
>> bridge=br0
>> driver=madwifi
>> logger_syslog=-1
>> logger_syslog_level=2
>> logger_stdout=-1
>> logger_stdout_level=2
>> debug=0
>> dump_file=/tmp/hostapd.dump
>> ctrl_interface=/var/run/hostapd
>> ctrl_interface_group=0
>> ssid=test_ssid
>> macaddr_acl=0
>> auth_algs=3
>> wpa=3
>> wpa_passphrase=XXXXXXXXXXX
>> wpa_key_mgmt=WPA-PSK
>> wpa_pairwise=TKIP CCMP
>>
>> -----Original Message-----
>> From: hostap-bounces+nazeer.khan=nicta.com.au at shmoo.com
>> [mailto:hostap-bounces+nazeer.khan=nicta.com.au at shmoo.com] On Behalf Of
>> maloomnahi at indiatimes.com
>> Sent: Monday, September 10, 2007 1:30 PM
>> To: Nazeer Khan
>> Cc: hostap at shmoo.com
>> Subject: Re: Hostapd gives error with Madwifi.conf file
>>
>> Hi Nazeer,
>>
>> Thanks for the information, I had the same setting in my .config file
>> and
>> no
>> use changing that. Below is the result I am getting now:
>>
>> [root at localhost hostapd-0.5.8]# hostapd -dd madwifi.conf
>> Configuration file: madwifi.conf
>> 'ine 14: invalid/unknown driver 'madwifi
>> '.2 errors found in configuration file 'madwifi.conf'
>>
>> [root at localhost hostapd-0.5.8]# hostapd -dd hostapd.conf
>> Configuration file: hostapd.conf
>> ctrl_interface_group=0
>> eapol_version=1
>> ioctl[SIOCSIWMODE]: Operation not supported
>> Could not set interface to master mode!
>> madwifi driver initialization failed.
>> eth0: Unable to setup interface.
>> Flushing old station entries
>> Deauthenticate all stations
>> rmdir[ctrl_interface]: No such file or directory
>>
>> I am not finding any solution to this as of now, it would be great if
>> you
>> could give me a solution to this problem. Following are the additional
>> information. .Config, hostapd.conf are set according to the ticket 539
>> and
>> as per lists.shmoo.com.
>>
>> Madiwfi-0.9.3.1
>> Linux 2.6.18
>> Hostapd 0.5.8
>> AR5212 Chipset
>>
>> Thanks
>> PPN
>>
>>
>> ----- Original Message -----
>> From: Nazeer Khan <Nazeer.Khan at nicta.com.au>
>> To: maloomnahi at indiatimes.com
>> Cc: hostap at shmoo.com
>> Sent: Sat, 8 Sep 2007 06:35:52 +0530 (IST)
>> Subject: Re: Hostapd gives error with Madwifi.conf file
>>
>>
>> On Fri, September 7, 2007 5:10 pm, maloomnahi at indiatimes.com said:
>>> Dear All,
>>>
>>> This email is with regards to a problem faced while running the
>>> hostapdv0.5.8 with madwifi CONFIG file. Its about hostapd -dd
>>> madwifi.conf
>>> giving "Line 14: invalid/unknown driver 'madwifi" error on the prompt.
>>
>> I believe you have not compiled hostapd with madwifi support. Change the
>> .config file to include madwifi driver too.
>>
>> # Driver interface for madwifi driver
>> CONFIG_DRIVER_MADWIFI=y
>> CFLAGS += -I/usr/src/madwifi-ng
>>
>> --
>> Regards,
>>
>> Nazeer Khan
>> Research Student
>> Networks and Pervasive Computing
>> National ICT Australia Limited
>> Phone: +61 2 8374 5554
>> Mobile: +61 415627442
>>
>> The imagination driving Australia's ICT future.
>>
>> _______________________________________________
>> HostAP mailing list
>> HostAP at shmoo.com
>> http://lists.shmoo.com/mailman/listinfo/hostap
>>
>>
>
>
> --
> Regards,
>
> Nazeer Khan
> Research Student
> Networks and Pervasive Computing
> National ICT Australia Limited
> Phone: +61 2 8374 5554
> Mobile: +61 415627442
>
> The imagination driving Australia's ICT future.
>
> _______________________________________________
> HostAP mailing list
> HostAP at shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap
>
--
Regards,
Nazeer Khan
Research Student
Networks and Pervasive Computing
National ICT Australia Limited
Phone: +61 2 8374 5554
Mobile: +61 415627442
The imagination driving Australia's ICT future.
More information about the Hostap
mailing list