windows can connect, ubuntu not

[Joerg Schoppet]

Nazeer Khan schrieb:
> Hi,
>
> Send me your config files for both hostapd and wpa supplicant..... I will
> test them for you and see wat the problem might be.
>
> Cheers
>
>
> On Sat, September 1, 2007 11:39 pm, Joerg Schoppet said:
>   
>> Nazeer Khan schrieb:
>>     
>>> Hi,
>>>
>>> The PSK seems to be incorrect. The 3 MSG of 4-way handshake is
>>> encrypted.
>>> Check the PSK on the station and confirm that it is the same as on AP.
>>> You
>>> can also find a debug MSG on STA if u are using wpa supplicant.
>>>
>>> Cheer
>>>       
>> Hi,
>>
>> thanks for the tip, BUT:
>>
>> I've changed the PSK on both, the AP and the STA to "1234567890123",
>> made a "wpa_passphrase my_private_ap 1234567890123" and filled the
>> result on the server in hostapd.conf "wpa_psk" and on the client in the
>> wpa_supplicant.conf "psk".
>>
>> Same result.
>>
>> On the STA I get the following messages in /var/log/messages:
>> SoftMAC: Open Authentication completed with 00:60:b3:4e:f6:db
>> SoftMAC: Authentication timed out with 00:60:b3:4e:f6:db
>>
>> The MAC is the MAC of my AP.
>>
>> But in /var/log/daemon.log on the AP I only see:
>> hostapd: ath0: STA 00:90:96:b8:23:53 IEEE 802.11: associated
>> hostapd: ath0: STA 00:90:96:b8:23:53 IEEE 802.11: deauthenticated due to
>> local deauth request
>> hostapd: ath0: STA 00:90:96:b8:23:53 IEEE 802.11: disassociated
>>
>>
>> The MAC is the MAC of my STA.
>>
>>
>> What else can I do?
>>
>> Just for information: With an open AP (without hostapd) I can connect
>> without problems.
>>
>>
>> Joerg Schoppet
Hi,

some more additional information:

With another ubuntu 7.04 server with a ralink-pci-card (Ethernet
controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev
10)) the connect to the wpa-ap works like a charme (this card-drivers
have build-in wpa-support so no wpa_supplicant is needed).

The ubuntu 7.04 laptop (dell ispiron 8600) has a broadcom-card (Ethernet
controller: Broadcom Corporation BCM4401 100Base-T (rev 01)). Here I
need wpa_supplicant and the connect does not work :-(

Joerg