wpa2-psk
Dan Williams
dcbw
Wed Nov 21 06:54:13 PST 2007
On Wed, 2007-11-21 at 19:02 +0530, Paresh Sawant wrote:
> WPA2 means RSN. The conf file parser would fail if you write "RSN"
> since it is not correct value for proto. So if you write WPA2 it would
> perform RSNA.
I'm pretty sure that wpa_supplicant accepts either RSN or WPA2 for this
value.
Dan
> "TKIP" for pairwise cipher is acceptable and in that case grp cipher
> would be forced to be TKIP.
>
> On Nov 21, 2007 6:57 PM, Anjali Shirvoikar
> <anjali_shirvoikar at persistent.co.in> wrote:
> Will following work?
>
> network={
> ssid="my_ssid"
> scan_ssid=1
>
>
> proto=RSN
>
> key_mgmt=WPA-PSK
> pairwise=TKIP
> psk="my_psk_passphrase"
> }
> Thanks,
>
> Anjali
>
>
>
>
> ______________________________________________________________
> From: Paresh Sawant [mailto:paresh.sawant at gmail.com]
> Sent: Wednesday, November 21, 2007 6:51 PM
> To: Anjali Shirvoikar
> Cc: hostap
> Subject: Re: wpa2-psk
>
>
>
>
>
> yes it does.
>
> All that you need is following network block in your .conf
> file
>
> network={
> ssid="my_ssid"
> scan_ssid=1
> key_mgmt=WPA-PSK
> proto=WPA2
> pairwise=CCMP
> group=CCMP
> psk="my_psk_passphrase"
> }
>
>
>
> On Nov 21, 2007 6:20 PM, Anjali Shirvoikar
> <anjali_shirvoikar at persistent.co.in> wrote:
>
> Hi,
>
> Does the wpa_supplicant support wpa2-psk ? Can anyone send me
> a
> wpa_supplicant.conf file for configuring wpa2-psk?
>
> Anjali
>
> _______________________________________________
> HostAP mailing list
> HostAP at shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap
>
>
>
>
>
>
> _______________________________________________
> HostAP mailing list
> HostAP at shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap
More information about the Hostap
mailing list