problem with wpa_supplicant file for EAP-MD5

Sun Jun 3 08:54:39 PDT 2007

Hello all,
i m using wpa_supplicant with radius server, the problem which i m facing is that i m geting on server side a message of ACCESS ACCEPT, but my client side is showing EAP FAILURE. i m not able to figure out the problem. I am sending u the client side result and my wpa_supplicant.conf, can u please tell where i m doing a mistake.
please do help me.

this is my supplicant.conf:-

ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=wheel
eapol_version=1
ap_scan=1
fast_reauth=1 
network={
ssid="ATH183"
scan_ssid=1
key_mgmt=WPA-EAP
eap=MD5
identity="testuser"
password="whatever"
}

client side result:-

Selecting BSS from priority group 0
0: 00:03:7f:09:60:7e ssid='ATH183' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
   selected based on WPA IE
Trying to associate with 00:03:7f:09:60:7e (SSID='ATH183' freq=2462 MHz)
CTRL_IFACE monitor send - hexdump(len=22): 2f 74 6d 70 2f 77 70 61  5f 63 74 72 6c 5f 31 38 33 39 37 2d 35 00
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 1 proto 1
WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 01
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using  PTK TKIP
WPA: using KEY_MGMT 802.1X
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 01
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
State: DISCONNECTED -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - portControl=Auto
RTM_NEWLINK: operstate=0  ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b04 len=12
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b1a len=14
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:03:7f:09:60:7e
State: ASSOCIATING ->  ASSOCIATED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
Associated to a new BSS: BSSID=00:03:7f:09:60:7e
No keys have been configured - skip key clearing
Associated with 00:03:7f:09:60:7e
CTRL_IFACE monitor send - hexdump(len=22): 2f 74 6d 70 2f 77 70 61 5f 63 74 72 6c 5f 31 38 33 39 37 2d 35 00
WPA: Association event - clear replay counter
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - portEnabled=1
EAPOL:  SUPP_PAE entering state CONNECTING
EAPOL: SUPP_BE entering state IDLE
EAP: EAP entering state INITIALIZE
EAP: deinitialize previously used EAP method (4, MD5) at INITIALIZE
EAP: EAP entering state IDLE
Setting authentication timeout: 10 sec 0 usec
Cancelling scan request
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
RX  EAPOL from 00:03:7f:09:60:7e
RX EAPOL - hexdump(len=9): 01 00 00 05 01 00 00 05 01
Setting authentication timeout: 70 sec 0 usec
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_PAE entering state RESTART
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=0 method=1 vendor=0 vendorMethod=0
EAP: EAP entering state IDENTITY
CTRL-EVENT-EAP-STARTED EAP  authentication started
CTRL_IFACE monitor send - hexdump(len=22): 2f 74 6d 70 2f 77 70 61 5f 63 74 72 6c 5f 31 38 33 39 37 2d 35 00
EAP: EAP-Request Identity data - hexdump_ascii(len=0):
EAP: using real identity - hexdump_ascii(len=8):
     74 65 73 74 75 73 65  72                           testuser
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL - hexdump(len=17): 01 00 00 0d 02 00 00 0d 01 74 65 73 74 75 73 65 72
EAPOL: SUPP_BE entering state RECEIVE
RX EAPOL from 00:03:7f:09:60:7e
RX EAPOL - hexdump(len=26): 01 00 00 16 01 01 00 16 04 10 a5 9b 8e 83 0e 3c fd aa 30 e8 29 32 07 e2 c3 c5
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering  state RECEIVED
EAP: Received EAP-Request id=1 method=4 vendor=0 vendorMethod=0
EAP: EAP entering state GET_METHOD
EAP: Initialize selected EAP method: vendor 0 method 4 (MD5)
CTRL-EVENT-EAP-METHOD EAP vendor 0 method 4 (MD5) selected
CTRL_IFACE monitor send - hexdump(len=22): 2f 74  6d 70 2f 77 70 61 5f 63 74 72 6c 5f 31 38 33 39 37 2d 35 00
EAP: EAP entering state METHOD
EAP-MD5: Challenge - hexdump(len=16): a5 9b 8e 83 0e 3c fd aa 30 e8 29 32 07 e2 c3 c5
EAP-MD5: Generating Challenge Response
EAP-MD5: Response - hexdump(len=16): 13 e3 bb c0 31 ca a7 ad 5c d0 4d 54 d7 5b 57 32
EAP: method process -> ignore=FALSE methodState=DONE decision=UNCOND_SUCC
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL - hexdump(len=26): 01 00 00 16 02 01 00 16 04 10 13 e3 bb c0 31 ca a7 ad 5c d0 4d 54 d7 5b 57 32
EAPOL: SUPP_BE entering state RECEIVE
RX  EAPOL from 00:03:7f:09:60:7e
RX EAPOL - hexdump(len=8): 01 00 00 04 04 01 00 04
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Failure
EAP: EAP entering state DISCARD
EAP: EAP entering  state IDLE
EAPOL: SUPP_BE entering state RECEIVE

regards 
shantanu

---------------------------------
 Looking for people who are YOUR TYPE?  Find them here!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20070603/8610ed38/attachment.htm 