4Way Handshake Failure

[ramprasad.rajendran at wipro.com]

>-----Original Message-----
>From: hostap-bounces+ramprasad.rajendran=wipro.com at shmoo.com 
>[mailto:hostap-bounces+ramprasad.rajendran=wipro.com at shmoo.com]
> On Behalf Of Jouni Malinen
>Sent: Wednesday, February 07, 2007 9:35 AM
>To: hostap at shmoo.com
>Subject: Re: 4Way Handshake Failure
>
>
>On Tue, Feb 06, 2007 at 01:13:03PM +0530, 
>ramprasad.rajendran at wipro.com wrote:
>
>> I am using EAP-FAST as the authentication on a custom built board. 
>> Authentication suceeds, but the 4 Way Handshake Fails.
>
>Which authentication server are you using?

>> I've made some changes to port it to our platform.(OS, timer and the 
>> configuration params, removed certificate processing)
>
>What exactly do you mean by removing certificate processing? 
>With TLS implementation are you using?

Thanks!
There were some problems in my changes. I had removed the scanning and
association code as it was taken care by the driver so as to reduce
size. I wasn't sending the proper RSNIE information element in msg 3/4.

Just to answer the above questions, I am using the internal crypto and
TLS libraries. I had removed the part of code that processes
certificates(to reduce size) because we were using PAC for
authentication and Steel Belted Radius as the RADIUS Server.

----
ram



The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. 

WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.
 
www.wipro.com