ndiswrapper + wpa_supplicant

[Sukku]

Hi George and Dan,

First of all thank you very much for your replay.

I tried with NetworkManager also.. with NM also I didn't get successes.

In var/log/messages I am getting this logs:

Dec  6 12:44:14 sukumar NetworkManager: <info>  Config: added 'ssid' value
'test1'
Dec  6 12:44:14 sukumar NetworkManager: <info>  Config: added 'key_mgmt'
value 'WPA-EAP'
Dec  6 12:44:14 sukumar NetworkManager: <info>  Config: added 'identity'
value 'default'
Dec  6 12:44:14 sukumar NetworkManager: <info>  Config: added 'password'
value '<omitted>'
Dec  6 12:44:14 sukumar NetworkManager: <info>  Config: added 'eap' value
'LEAP'
Dec  6 12:44:14 sukumar NetworkManager: <info>  Config: added 'proto' value
'WPA RSN WPA RSN'
Dec  6 12:44:14 sukumar NetworkManager: <info>  Config: added 'pairwise'
value 'TKIP CCMP TKIP CCMP'
Dec  6 12:44:14 sukumar NetworkManager: <info>  Config: added 'group' value
'WEP40 WEP104 TKIP CCMP WEP40 WEP104 TKIP CCMP'
Dec  6 12:44:14 sukumar NetworkManager: <info>  Activation (wlan0) Stage 2
of 5 (Device Configure) complete.
Dec  6 12:44:14 sukumar NetworkManager: <info>  (wlan0) Supplicant interface
state change: 0 -> 2
Dec  6 12:44:39 sukumar NetworkManager: <info>  Activation (wlan0/wireless):
association took too long, asking for new key.
Dec  6 12:44:39 sukumar NetworkManager: <info>  (wlan0) Supplicant interface
state change: 2 -> 0
Dec  6 12:44:44 sukumar NetworkManager: <WARN>  get_secrets_cb(): Couldn't
get connection secrets: applet.c.2997 (get_secrets_dialog_response_cb):
canceled.
Dec  6 12:44:44 sukumar NetworkManager: <info>  Activation (wlan0) failed
for access point (Neolinksys)
Dec  6 12:44:44 sukumar NetworkManager: <info>  Marking connection 'Auto
Neolinksys' invalid.
Dec  6 12:44:44 sukumar NetworkManager: <info>  Activation (wlan0) failed.
Dec  6 12:44:44 sukumar NetworkManager: <info>  Deactivating device wlan0.
Dec  6 12:44:44 sukumar NetworkManager: <info>  SWITCH: no current
connection, found better connection 'Auto Ethernet (eth0)

Dec  6 12:45:52 sukumar NetworkManager: <info>  Config: added 'ssid' value
'test2'
Dec  6 12:45:52 sukumar NetworkManager: <info>  Config: added 'key_mgmt'
value 'WPA-PSK'
Dec  6 12:45:52 sukumar NetworkManager: <info>  Config: added 'psk' value
'<omitted>'
Dec  6 12:45:52 sukumar NetworkManager: <info>  Config: added 'proto' value
'WPA RSN'
Dec  6 12:45:52 sukumar NetworkManager: <info>  Config: added 'pairwise'
value 'TKIP CCMP'
Dec  6 12:45:52 sukumar NetworkManager: <info>  Config: added 'group' value
'WEP40 WEP104 TKIP CCMP'
Dec  6 12:45:52 sukumar NetworkManager: <info>  Activation (wlan0) Stage 2
of 5 (Device Configure) complete.
Dec  6 12:45:52 sukumar NetworkManager: <info>  (wlan0) Supplicant interface
state change: 0 -> 2
Dec  6 12:45:52 sukumar avahi-daemon[1896]: Interface eth0.IPv4 no longer
relevant for mDNS.
Dec  6 12:45:52 sukumar avahi-daemon[1896]: Withdrawing address record for
fe80::20c:29ff:fe9d:5560 on eth0.
Dec  6 12:46:17 sukumar NetworkManager: <info>  Activation (wlan0/wireless):
association took too long, asking for new key.
Dec  6 12:46:17 sukumar NetworkManager: <info>  (wlan0) Supplicant interface
state change: 2 -> 0




As per my understating the problem will be "what ever the IOCTL commands
generated by wpa_supplicant  are not understood by  ndiswrappered  drivers"

To resolve this problem where I need to change the code. Plz help me.

Thanks and regards,
Sukumar


On Dec 5, 2007 8:47 PM, Dan Williams <dcbw at redhat.com> wrote:

> On Wed, 2007-12-05 at 11:09 -0400, George N. White III wrote:
> > On Dec 5, 2007 10:25 AM, Sukku <m.sukumar at gmail.com> wrote:
> > > Hi All,
> > >
> > > From last two weeks, I am working on this problem. I am working on FC8
> with
> > > kernel version 2.6.23.1-42.
> > >
> > > I am using Linksys wireless adapter (WUSB54G). I didn't found any
> linux
> > > drivers for this device. so by using ndiswrappers I installed windows
> native
> > > drives in linux box. finally adapter got detected.
> > >
> > > after words  I try to use this  wpa_supplicant on this adapter.  Hear
> I am
> > > facing problem
> > >
> > > In debugging mode  I am getting so many IOCTL errors. I am not
> getting,
> > > there errors are from ndiswrapper or wpa_supplicant.
> >
> > I saw those errors, and failed to connect, also using FC8 with a
> ndiswrapper
> > but a different  USB dongle (TEW).    However, NetworkManager is more or
> > less working (too frequent disconnects from my AP, connects to random
> > open AP's).   Check that there isn't a 2nd copy of wpa_supplicant
> running.
>
> NM itself will only ever connect to an AP that you've chosen from the
> menu.
>
> If you've never chosen that AP from the menu, it's important to remember
> that the driver and/or firmware also control roaming, and that
> often-times the driver/firmware will decide to associate to an access
> point without being told to so (ipw* does this a lot).  Some drivers
> have module options to disable that functionality, and the only real
> arguments I've heard for this behavior are that people alone in the
> woods then don't need to issue manual iwconfig commands when they start
> their computer up.  I'm not sure what the security implications of the
> card connecting to a random open AP are, but it can't be much good.
>
> dan
>
>
>


-- 

-------
????????.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20071206/241b553b/attachment.htm