wpa_supplicant 0.5.7 and ndiswrapper 1.38 not working
Brian J. Murrell
brian
Sun Apr 29 15:42:10 PDT 2007
I'm trying to use wpa_supplicant 0.5.7 with ndiswrapper 1.38 on Ubuntu
feisty along with the nm-applet. I choose personal psk and put in my
key and get the kind of problem I previous wrote this list about here:
http://lists.shmoo.com/pipermail/hostap/2006-August/013802.html
It seems then it was due to using -D ndiswrapper rather than -D wext.
AFAICT though the NetworkManager tool on Ubuntu Feisty is using wext and
I am getting this problem. Here is a dump of the ndiswrapper debug:
Global control interface '/var/run/wpa_supplicant-global'
RX global ctrl_iface - hexdump_ascii(len=50):
49 4e 54 45 52 46 41 43 45 5f 41 44 44 20 77 6c INTERFACE_ADD wl
61 6e 30 09 09 77 65 78 74 09 2f 76 61 72 2f 72 an0__wext_/var/r
75 6e 2f 77 70 61 5f 73 75 70 70 6c 69 63 61 6e un/wpa_supplican
74 09 t_
CTRL_IFACE GLOBAL INTERFACE_ADD 'wlan0^I^Iwext^I/var/run/wpa_supplicant^I'
Initializing interface 'wlan0' conf 'N/A' driver 'wext' ctrl_interface '/var/run/wpa_supplicant' bridge 'N/A'
Initializing interface (2) 'wlan0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=21 WE(source)=18 enc_capa=0x5
capabilities: key_mgmt 0x5 enc 0x7
WEXT: Operstate: linkmode=1, operstate=5
2:08
wpa_driver_wext_set_wpa
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
wpa_driver_wext_set_drop_unencrypted
Setting scan request: 0 sec 100000 usec
Added interface wlan0
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b06 len=8
RX ctrl_iface - hexdump_ascii(len=9):
41 50 5f 53 43 41 4e 20 31 AP_SCAN 1
RX ctrl_iface - hexdump_ascii(len=11):
41 44 44 5f 4e 45 54 57 4f 52 4b ADD_NETWORK
CTRL_IFACE: ADD_NETWORK
RX ctrl_iface - hexdump_ascii(len=37): [REMOVED]
CTRL_IFACE: SET_NETWORK id=0 name='ssid'
CTRL_IFACE: value - hexdump_ascii(len=18): [REMOVED]
ssid - hexdump_ascii(len=9):
69 6c 69 6e 78 5f 77 70 61 ilinx_wpa
iface - hexdump_ascii(len=23): [REMOVED]
CTRL_IFACE: SET_NETWORK id=0 name='proto'
CTRL_IFACE: value - hexdump_ascii(len=3): [REMOVED]
proto: 0x1
RX ctrl_iface - hexdump_ascii(len=30): [REMOVED]
CTRL_IFACE: SET_NETWORK id=0 name='key_mgmt'
CTRL_IFACE: value - hexdump_ascii(len=7): [REMOVED]
key_mgmt: 0x2
RX ctrl_iface - hexdump_ascii(len=82): [REMOVED]
CTRL_IFACE: SET_NETWORK id=0 name='psk'
CTRL_IFACE: value - hexdump_ascii(len=64): [REMOVED]
PSK - hexdump(len=32): [REMOVED]
RX ctrl_iface - hexdump_ascii(len=16):
45 4e 41 42 4c 45 5f 4e 45 54 57 4f 52 4b 20 30 ENABLE_NETWORK 0
CTRL_IFACE: ENABLE_NETWORK id=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Trying to get current scan results first without requesting a new scan to speed up initial association
Received 486 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:12:17:41:37:c8 ssid='ilinx_wpa' wpa_ie_len=30 rsn_ie_len=26 caps=0x11
PA IE
Trying to associate with 00:12:17:41:37:c8 (SSID='ilinx_wpa' freq=2412 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 1
WPA: set AP WPA IE - hexdump(len=30): dd 1c 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 04 00 50 f2 02 01 00 00 50
WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 04 00 0f ac 02 01 00 00 0f ac 02 00 00
WPA: using GTK TKIP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RSN: Ignored PMKID candidate without preauth flag
CTRL_IFACE monitor attached - hexdump(len=42): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b04 len=12
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b1a len=17
Authentication with 00:00:00:00:00:00 timed out.
CTRL_IFACE monitor send - hexdump(len=42): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f
Added BSSID 00:12:17:41:37:c8 into blacklist
State: ASSOCIATING -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Scan timeout - try to get results
Received 486 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:12:17:41:37:c8 ssid='ilinx_wpa' wpa_ie_len=30 rsn_ie_len=26 caps=0x11
selected based on WPA IE
Trying to associate with 00:12:17:41:37:c8 (SSID='ilinx_wpa' freq=2412 MHz)
CTRL_IFACE monitor send - hexdump(len=42): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 1
WPA: set AP WPA IE - hexdump(len=30): dd 1c 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 04 00 50 f2 02 01 00 00 50
c 02 02 00 00 0f ac 04 00 0f ac 02 01 00 00 0f ac 02 00 00
WPA: using GTK TKIP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RSN: Ignored PMKID candidate without preauth flag
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b04 len=12
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b1a len=17
Authentication with 00:00:00:00:00:00 timed out.
CE monitor send - hexdump(len=42): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f 77 70 61
BSSID 00:12:17:41:37:c8 blacklist count incremented to 2
State: ASSOCIATING -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Scan timeout - try to get results
Received 486 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:12:17:41:37:c8 ssid='ilinx_wpa' wpa_ie_len=30 rsn_ie_len=26 caps=0x11
skip - blacklisted
1: 00:04:e2:b2:c9:52 ssid='SMC' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
skip - SSID mismatch
No APs found - clear blacklist and try again
Removed BSSID 00:12:17:41:37:c8 from blacklist (clear)
S from priority group 0
0: 00:12:17:41:37:c8 ssid='ilinx_wpa' wpa_ie_len=30 rsn_ie_len=26 caps=0x11
selected based on WPA IE
Trying to associate with 00:12:17:41:37:c8 (SSID='ilinx_wpa' freq=2412 MHz)
CTRL_IFACE monitor send - hexdump(len=42): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 1
WPA: set AP WPA IE - hexdump(len=30): dd 1c 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 04 00 50 f2 02 01 00 00 50
WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 04 00 0f ac 02 01 00 00 0f ac 02 00 00
WPA: using GTK TKIP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2
Hopefully there is no keying info in there. :-) I guess I can just
reset my key if there was. dmesg tells me:
[ 2072.304000] ndiswrapper version 1.38 loaded (preempt=no,smp=yes)
[ 2072.440000] ndiswrapper: driver bcmwl5 () loaded
[ 2072.448000] ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 2072.456000] ndiswrapper: using IRQ 5
[ 2072.984000] wlan0: ethernet device 00:90:4b:b0:22:08 using NDIS driver: bcmwl5, version: 0x50000, NDIS version: 0x500, vendor: '', 14E4:4301:1028:0407.5.conf
[ 2072.984000] ndiswrapper (set_encr_mode:694): setting encryption mode to 6 failed (C00000BB)
[ 2072.984000] wlan0: encryption modes supported: WEP; TKIP with WPA
...
[ 7606.996000] ndiswrapper (set_encr_mode:694): setting encryption mode to 6 failed (C00000BB)
[ 7620.000000] ndiswrapper (set_encr_mode:694): setting encryption mode to 6 failed (C00000BB)
[ 7633.004000] ndiswrapper (set_encr_mode:694): setting encryption mode to 6 failed (C00000BB)
[ 7646.008000] ndiswrapper (set_encr_mode:694): setting encryption mode to 6 failed (C00000BB)
[ 7659.016000] ndiswrapper (set_encr_mode:694): setting encryption mode to 6 failed (C00000BB)
Any ideas what the problem could be?
b.
--
My other computer is your Microsoft Windows server.
Brian J. Murrell
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
Url : http://lists.shmoo.com/pipermail/hostap/attachments/20070429/c9a593bb/attachment.pgp
More information about the Hostap
mailing list