hostapd unknown errors

[Jouni Malinen]

On Sun, Apr 01, 2007 at 08:27:31AM +0100, Dimitris Theoharis wrote:
> starts fine , then it prints this stuff. Not sure if thats an error or not

> RATE[3] rate=110 flags=0x40
> Could not set passive scanning: Unknown error 4294967295
> Flushing old station entries
> Deauthenticate all stations
> Received management frrame - hexdump(len=146): 00 12 3f d1 d9 21 00 e0
> 18 b6 b0 00 08 00 45 10 00 84 7e 79 40 00 40 06 a7 d4 0a 00 00 0a 0a
> 00 00 0d 00 16 b8 d5 03 a1 0c ab 01 ea 39 59 80 18 10 e0 9f 77 00 00
> 01 01 08 0a 02 1f 43 8b 00 01 95 3a 6e 1a 93 c0 2c e6 60 55 78 f0 02
> ff e9 19 e0 18 21 3b 60 8b 9b ed 3f 36 f9 b5 91 ed e6 cc 8e 3f 58 c0
> fa 3a 79 67 23 20 d6 d9 13 2d ed b9 39 db 9b c9 19 63 91 24 8d 85 30
> 07 ff 94 a9 1f 58 53 6b 07 a2 29 80 53 49 5e 71 f9 a0 f1 af 1e 01 d2
> MGMT
> MGMT: BSSID=00:84:7e:79:40:00 not our address

This is all fine.

> Wireless event: cmd=0x8c04 len=20

IWEVEXPIRED

> Wireless event: cmd=0x8b04 len=12
> Wireless event: cmd=0x8b04 len=12

... SIOCSIWFREQ

Are you running some software that changes the channel constantly
(iwconfig wlan0 channel N)? Those would likely show up as these events
here (and would likely confuse most of the stations trying to use this
AP)..

-- 
Jouni Malinen                                            PGP id EFC895FA