supplicant under WinXP

[Attila Ruzsinszky]

Hi,

I'm a beginner in wpa_supplicant under M$ XP.

I configured a WPA Enterprise and I want to connect it.
(WPA+TKIP - Linksys WRT54GL OpenWRT RC4 +
FreeRADIUS under SuSE 9.0)
This config is working under Linux SuSE 9.3 with
wpa_supplicant but not under WinXP!

My cards are:
- Senao NL-2511CD Plus(E100)
- SMC WCB-G-EU
- Asus notebook with built-in Broadcom chip.

Seano (SuSE9.3) and SMC (SuSE10.0) is working.

My first question:
- Can I use those cards with WPA Enterprise because
Windows drivers aren't supported, max. WPA-PSK
(SMC) and WEP (Senao)?
- If the first answer is positive, then I've got a problem,
because I made a test under XP with Senao and I
wasn't able to connect:

Initializing interface
'\Device\NPF_{888D223C-4295-41F1-8B48-00EF7B147C74}' conf
'wpa_supplicant.conf' driver 'ndis' ctrl_interface 'N/A'
Configuration file 'wpa_supplicant.conf' ->
'D:\wpa_supplicant-windows-bin-0.4.8/wpa_supplicant.conf'
Reading configuration file
'D:\wpa_supplicant-windows-bin-0.4.8/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
eapol_version=1
ap_scan=1
fast_reauth=1
opensc_engine_path='/usr/lib/opensc/engine_opensc.so'
pkcs11_engine_path='/usr/lib/opensc/engine_pkcs11.so'
pkcs11_module_path='/usr/lib/pkcs11/opensc-pkcs11.so'
Priority group 1
   id=0 ssid='mySSID'
Initializing interface (2) '\Device\NPF_{888D223C-4295-41F1-8B48-00EF7B147C74}'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
NDIS: Packet.dll version: 3, 1, 0, 27
NDIS: 3 adapter names found
NDIS: 3 adapter descriptions found
NDIS: 0 - \Device\NPF_GenericDialupAdapter - Generic dialup adapter
NDIS: 1 - \Device\NPF_{888D223C-4295-41F1-8B48-00EF7B147C74} - IEEE
802.11b WLAN network adaptor PC Card (Microsoft's Packet Scheduler)
NDIS: 2 - \Device\NPF_{D0BA227F-7E51-48D3-810E-497E928DD123} - SiS NIC
SISNIC (Microsoft's Packet Scheduler)
NDIS: Adapter description prefix 'IEEE 802.11b WLAN network adaptor PC Card'
ndis_get_oid: oid=0xd010122 len (512) failed
NDIS: verifying driver WPA capability
NDIS: WPA key management supported
NDIS: WPA-PSK key management supported
ndis_set_oid: oid=0xd01011b len (4) failed
NDIS: Failed to set OID_802_11_ENCRYPTION_STATUS (6)
NDIS: TKIP encryption supported
NDIS: driver supports WPA
NDIS: driver capabilities: key_mgmt 0x5 enc 0x4 auth 0x3
Own MAC address: 00:02:6f:33:xx:yy
wpa_driver_ndis_set_wpa: enabled=1
ndis_get_oid: oid=0xd010101 len (6) failed
ndis_set_oid: oid=0xd010114 len (4) failed
ndis_get_oid: oid=0xd010101 len (6) failed
ndis_set_oid: oid=0xd010114 len (4) failed
ndis_get_oid: oid=0xd010101 len (6) failed
ndis_set_oid: oid=0xd010114 len (4) failed
ndis_get_oid: oid=0xd010101 len (6) failed
ndis_set_oid: oid=0xd010114 len (4) failed
Setting scan request: 0 sec 100000 usec
Added interface \Device\NPF_{888D223C-4295-41F1-8B48-00EF7B147C74}
State: DISCONNECTED -> SCANNING
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=11):
     xx xx xx xx xx xx xx xx xx xx                    mySSID
NDIS: turning radio on before the first scan
ndis_get_oid: oid=0xd010101 len (6) failed
ndis_get_oid: oid=0xd010101 len (6) failed
ndis_get_oid: oid=0xd010101 len (6) failed
Scan timeout - try to get results
Scan results: 1
Selecting BSS from priority group 1
0: 00:02:6f:xx:xx:xx ssid='otherSSID' wpa_ie_len=0 rsn_ie_len=0 caps=0x0
   skip - no WPA/RSN IE
No suitable AP found.
Setting scan request: 5 sec 0 usec
ndis_get_oid: oid=0xd010101 len (6) failed
ndis_get_oid: oid=0xd010101 len (6) failed
ndis_get_oid: oid=0xd010101 len (6) failed
ndis_get_oid: oid=0xd010101 len (6) failed
ndis_get_oid: oid=0xd010101 len (6) failed
Starting AP scan (broadcast SSID)
...

Is this a config problem or driver or anything else?
mySSID is hidden...

TIA,
Ruzsi