Problem with Hostap and wpa_supplicant :(

Alric Aneron aluminum3458
Mon Jun 26 08:25:40 PDT 2006


Anyone please any suggestions? or should I just give up?

-------------------
Hi,
Thats the full output from the command:

$wpa_supplicant -iwlan0 -c/etc/wpa_supplicant/wpa_supplicant.conf -Dhostap -ddt
Jun 23 11:07:21.791239: Initializing interface 'wlan0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'hostap' ctrl_interface 'N/A'
Jun 23 11:07:21.791511: Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf'
Jun 23 11:07:21.791573: Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'
Jun 23 11:07:21.841927: ctrl_interface='/var/run/wpa_supplicant'
Jun 23 11:07:21.842950: ctrl_interface_group=0
Jun 23 11:07:21.843077: eapol_version=1
Jun 23 11:07:21.843132: ap_scan=2
Jun 23 11:07:21.843185: Line: 21 - start of a new network block
Jun 23 11:07:21.843242: scan_ssid=1 (0x1)
Jun 23 11:07:21.843297: ssid - hexdump_ascii(len=10):
     xxxxxxxxxxxxxxxxxxxxxxxxxxx                     mynet
Jun 23 11:07:21.843396: pairwise: 0x18
Jun 23 11:07:21.843448: key_mgmt: 0x2
Jun 23 11:07:21.843502: PSK - hexdump(len=32): [REMOVED]
Jun 23 11:07:21.843571: Priority group 0
Jun 23 11:07:21.843625:    id=0 ssid='mynet'
Jun 23 11:07:21.843677: Initializing interface (2) 'wlan0'
Jun 23 11:07:21.850196: EAPOL: SUPP_PAE entering state DISCONNECTED
Jun 23 11:07:21.850345: EAPOL: KEY_RX entering state NO_KEY_RECEIVE
Jun 23 11:07:21.850401: EAPOL: SUPP_BE entering state INITIALIZE
Jun 23 11:07:21.850457: EAP: EAP entering state DISABLED
Jun 23 11:07:21.850541: EAPOL: External notification - portEnabled=0
Jun 23 11:07:21.850607: EAPOL: External notification - portValid=0
Jun 23 11:07:21.850948: SIOCGIWRANGE: WE(compiled)=19 WE(source)=18 enc_capa=0xfJun 23 11:07:21.851026:   capabilities: key_mgmt 0xf enc 0xf
Jun 23 11:07:21.855275: Added alternative ifindex 3 (wifi0) for wireless events
Jun 23 11:07:21.855446: Added alternative ifindex 3 (wifi0) for wireless events
Jun 23 11:07:21.921512: Own MAC address: 00:07:ac:02:c6:39
Jun 23 11:07:21.921670: wpa_driver_hostap_set_wpa: enabled=1
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported
Jun 23 11:07:21.975211: Driver does not support WPA.
Jun 23 11:07:21.975298: wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
Jun 23 11:07:21.975456: wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 key_len=0
Jun 23 11:07:21.975603: wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 key_len=0
Jun 23 11:07:21.975747: wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 key_len=0
Jun 23 11:07:21.975890: wpa_driver_hostap_set_countermeasures: enabled=0
Jun 23 11:07:21.975946: wpa_driver_hostap_set_drop_unencrypted: enabled=1
Jun 23 11:07:21.976014: Setting scan request: 0 sec 100000 usec
Jun 23 11:07:21.976409: Added interface wlan0
Jun 23 11:07:21.976536: Wireless event: cmd=0x8b06 len=8
Jun 23 11:07:22.076589: State: DISCONNECTED -> SCANNING
Jun 23 11:07:22.076663: Trying to associate with SSID 'mynet'
Jun 23 11:07:22.076680: Cancelling scan request
Jun 23 11:07:22.076695: WPA: clearing own WPA/RSN IE
Jun 23 11:07:22.076709: Automatic auth_alg selection: 0x1
Jun 23 11:07:22.077774: WPA: No WPA/RSN IE available from association info
Jun 23 11:07:22.077835: WPA: Set cipher suites based on configuration
Jun 23 11:07:22.077849: WPA: Selected cipher suites: group 30 pairwise 24 key_mgmt 2
Jun 23 11:07:22.077865: WPA: clearing AP WPA IE
Jun 23 11:07:22.077880: WPA: clearing AP RSN IE
Jun 23 11:07:22.077897: WPA: using GTK CCMP
Jun 23 11:07:22.077913: WPA: using PTK CCMP
Jun 23 11:07:22.077927: WPA: using KEY_MGMT WPA-PSK
Jun 23 11:07:22.077942: WPA: Set own WPA IE default - hexdump(len=22): 30 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Jun 23 11:07:22.077965: No keys have been configured - skip key clearing
Jun 23 11:07:22.077980: wpa_driver_hostap_set_drop_unencrypted: enabled=1
Jun 23 11:07:22.078002: State: SCANNING -> ASSOCIATING
Jun 23 11:07:22.078017: wpa_driver_hostap_associate
Jun 23 11:07:22.151452: Setting authentication timeout: 60 sec 0 usec
Jun 23 11:07:22.151516: EAPOL: External notification - EAP success=0
Jun 23 11:07:22.151550: EAPOL: External notification - EAP fail=0
Jun 23 11:07:22.151579: EAPOL: External notification - portControl=Auto
Jun 23 11:07:22.151629: Wireless event: cmd=0x8b06 len=8
Jun 23 11:07:22.151656: Wireless event: cmd=0x8b1a len=19
Jun 23 11:08:22.152391: Authentication with 00:00:00:00:00:00 timed out.
Jun 23 11:08:22.152448: Added BSSID 00:00:00:00:00:00 into blacklist
Jun 23 11:08:22.152477: State: ASSOCIATING -> DISCONNECTED
Jun 23 11:08:22.152493: No keys have been configured - skip key clearing
Jun 23 11:08:22.152508: EAPOL: External notification - portEnabled=0
Jun 23 11:08:22.152541: EAPOL: External notification - portValid=0
Jun 23 11:08:22.152572: Setting scan request: 0 sec 0 usec
Jun 23 11:08:22.152598: State: DISCONNECTED -> SCANNING
Jun 23 11:08:22.152616: Trying to associate with SSID 'mynet'
Jun 23 11:08:22.152631: Cancelling scan request
Jun 23 11:08:22.152645: WPA: clearing own WPA/RSN IE
Jun 23 11:08:22.152658: Automatic auth_alg selection: 0x1
Jun 23 11:08:22.152949: WPA: No WPA/RSN IE available from association info
Jun 23 11:08:22.152976: WPA: Set cipher suites based on configuration
Jun 23 11:08:22.152990: WPA: Selected cipher suites: group 30 pairwise 24 key_mgmt 2
Jun 23 11:08:22.153005: WPA: clearing AP WPA IE
Jun 23 11:08:22.153019: WPA: clearing AP RSN IE
Jun 23 11:08:22.153035: WPA: using GTK CCMP
Jun 23 11:08:22.153050: WPA: using PTK CCMP
Jun 23 11:08:22.153065: WPA: using KEY_MGMT WPA-PSK
Jun 23 11:08:22.153079: WPA: Set own WPA IE default - hexdump(len=22): 30 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Jun 23 11:08:22.153102: No keys have been configured - skip key clearing
Jun 23 11:08:22.153117: wpa_driver_hostap_set_drop_unencrypted: enabled=1
Jun 23 11:08:22.153136: State: SCANNING -> ASSOCIATING
Jun 23 11:08:22.153150: wpa_driver_hostap_associate
Jun 23 11:08:22.202336: Setting authentication timeout: 60 sec 0 usec
Jun 23 11:08:22.202422: EAPOL: External notification - EAP success=0
Jun 23 11:08:22.202456: EAPOL: External notification - EAP fail=0
Jun 23 11:08:22.202485: EAPOL: External notification - portControl=Auto
Jun 23 11:08:22.202532: Wireless event: cmd=0x8b06 len=8
Jun 23 11:08:22.202558: Wireless event:  cmd=0x8b1a len=19


The only thing I changed is replaced the hex values with "xxxxx", the rest is left the way it was given.  

Thanks  alot, I appreciate it,
Al

Jouni Malinen <jkmaline at cc.hut.fi> wrote: On Thu, Jun 22, 2006 at 08:12:47AM -0700, Alric Aneron wrote:

> the -debug output gives me this (hex code I replaced with xxxx for personal security reasons):
> 
> CTRL_IFACE monitor send - hexdump(len=23): xx xx xx.......
> WPA: Association event - clear replay counter

...

Could you please send full debug log with -ddt on the command line? This
one starts only after the scan results, but I would like to see what
happened earlier.

-- 
Jouni Malinen                                            PGP id EFC895FA

  


		
---------------------------------
Do you Yahoo!?
 Get on board. You're invited to try the new Yahoo! Mail Beta.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20060626/76c69427/attachment.htm 



More information about the Hostap mailing list