hostapd 0.4.9 with 2.6.17 kernel
Sun Kim
ulovecutesun
Wed Jul 19 15:01:20 PDT 2006
Hello,
I've installed hostapd 0.4.9 with 2.6.17 kernel.
When I run hostapd with the following config, i got an error (below the
config). It seems like not working in my machine if I set enable ieee
802.1x or wpa. Since I tested with simple.conf (no 802.1x and wpa), at least
it didn't show any error.
Any idea?
Many thanks in advance.
I list below used config files ( hostapd.config and simple.config) and some
specs ( uname, ifconfig, and iwconfig).
[root at localhost Desktop]# cat hostapd.conf | grep ^[a-zA-Z]
interface=wlan0
logger_syslog=-1
logger_syslog_level=2
logger_stdout=-1
logger_stdout_level=2
debug=0
dump_file=/tmp/hostapd.dump
ctrl_interface=/var/run/hostapd
ctrl_interface_group=0
ssid=test
macaddr_acl=0
auth_algs=3
eapol_key_index_workaround=0
eap_server=0
own_ip_addr=127.0.0.1
wpa=1
wpa_psk=0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef
wpa_passphrase=secret passphrase
wpa_key_mgmt=WPA-PSK WPA-EAP
wpa_pairwise=TKIP CCMP
[root at localhost Desktop]# hostapd -Bdd hostapd.conf
Configuration file: hostapd.conf
Opening raw packet socket for ifindex 6
Using interface wlan0 with hwaddr 00:02:2d:00:24:44 and ssid 'test'
Warning: both WPA PSK and passphrase set. Using passphrase.
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Invalid argument
Could not setup host-based encryption in kernel driver.
IEEE 802.1X initialization failed.
rmdir[ctrl_interface]: No such file or directory
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Invalid argument
Could not disable PrivacyInvoked for interface wlan0
-------------------------------------------------------------------------------------------------------------------------
[root at localhost Desktop]# cat simple.conf | grep ^[a-zA-Z]
interface=wlan0
logger_syslog=-1
logger_syslog_level=2
logger_stdout=-1
logger_stdout_level=2
debug=0
dump_file=/tmp/hostapd.dump
ctrl_interface=/var/run/hostapd
ctrl_interface_group=0
ssid=test
macaddr_acl=0
auth_algs=3
eapol_key_index_workaround=0
own_ip_addr=127.0.0.1
wpa_pairwise=TKIP CCMP
--------------------------------------------------------------------------------------------------------------------
[root at localhost Desktop]# cat simple.conf | grep ^[a-zA-Z]
interface=wlan0
logger_syslog=-1
logger_syslog_level=2
logger_stdout=-1
logger_stdout_level=2
debug=0
dump_file=/tmp/hostapd.dump
ctrl_interface=/var/run/hostapd
ctrl_interface_group=0
ssid=test
macaddr_acl=0
auth_algs=3
eapol_key_index_workaround=0
own_ip_addr=127.0.0.1
[root at localhost Desktop]# hostapd -Bdd hostapd.conf
Configuration file: hostapd.conf
Opening raw packet socket for ifindex 7
Using interface wlan0 with hwaddr 00:02:2d:00:24:44 and ssid 'test'
Flushing old station entries
Deauthenticate all stations
------------------------------------------------------------------------------------------------------------------------
Here is my specs:
[root at localhost Desktop]# uname -a
Linux localhost.localdomain 2.6.17-1.2142_FC4 #1 Tue Jul 11 22:41:14 EDT
2006 i686 i686 i386 GNU/Linux
[root at localhost Desktop]# /sbin/lsmod | grep host
hostap_cs 67073 1
hostap 119369 1 hostap_cs
ieee80211_crypt 7105 1 hostap
[root at localhost Desktop]# /sbin/ifconfig
dev11664 Link encap:UNSPEC HWaddr
00-02-2D-00-24-44-F8-71-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:312 (312.0 b)
Interrupt:3 Base address:0x100
eth0 Link encap:Ethernet HWaddr 00:03:47:0F:63:B0
inet addr:192.168.1.104 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::203:47ff:fe0f:63b0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:731 errors:0 dropped:0 overruns:0 frame:0
TX packets:704 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:364407 (355.8 KiB) TX bytes:201098 (196.3 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1728 errors:0 dropped:0 overruns:0 frame:0
TX packets:1728 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2012178 (1.9 MiB) TX bytes:2012178 (1.9 MiB)
wlan0 Link encap:Ethernet HWaddr 00:02:2D:00:24:44
inet6 addr: fe80::202:2dff:fe00:2444/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:312 (312.0 b)
Interrupt:3 Base address:0x100
[root at localhost Desktop]# /sbin/iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
sit0 no wireless extensions.
Warning: Driver for device dev11664 has been compiled with version 20
of Wireless Extension, while this program supports up to version 19.
Some things may be broken...
dev11664 IEEE 802.11b ESSID:"test"
Mode:Master Frequency:2.422 GHz Access Point: 02:02:2D:00:24:44
Bit Rate:11 Mb/s Sensitivity=1/3
Retry limit:4 RTS thr:off
Encryption key:off
Power Management:off
wlan0 IEEE 802.11b ESSID:"test"
Mode:Master Frequency:2.422 GHz Access Point: 02:02:2D:00:24:44
Bit Rate:11 Mb/s Sensitivity=1/3
Retry limit:4 RTS thr:off
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
--
Thanks,
Sun
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20060719/80da628c/attachment.htm
More information about the Hostap
mailing list