question about Hostap driver

[Denis Vlasenko]

On Tuesday 25 April 2006 11:49, ??? wrote:
> *********************lspci -v
> 00:01.0 Multimedia audio controller: Acer Laboratories Inc. [ALi]: Unknown 
> 
> device 5451 (rev 02)

Please turn off linewrapping.

> 	Subsystem: Acer Laboratories Inc. [ALi]: Unknown device 5451
> 	Flags: bus master, medium devsel, latency 128, IRQ 31
> 	I/O ports at ff00 [size=256]
> 	Memory at 37fff000 (32-bit, non-prefetchable) [size=4K]
> 	Capabilities: [dc] Power Management version 2
> 
> 00:02.0 ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge 
> 
> [Aladdin IV]
> 	Subsystem: Acer Laboratories Inc. [ALi] ALI M1533 Aladdin IV ISA 
> 
> Bridge
> 	Flags: bus master, medium devsel, latency 0, IRQ 31
> 	Capabilities: [a0] Power Management version 1
> 
> 00:03.0 Modem: Acer Laboratories Inc. [ALi]: Unknown device 5457 (prog-if 00 
> 
> [Generic])
> 	Subsystem: Acer Laboratories Inc. [ALi]: Unknown device 5457
> 	Flags: bus master, medium devsel, latency 128, IRQ 31
> 	Memory at 37ffe000 (32-bit, non-prefetchable) [size=4K]
> 	I/O ports at fe00 [size=256]
> 	Capabilities: [40] Power Management version 2
> 
> 00:06.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 81)
> 	Flags: bus master, medium devsel, latency 168, IRQ 31
> 	Memory at 37ffd000 (32-bit, non-prefetchable) [size=4K]
> 	Bus: primary=00, secondary=01, subordinate=01, sec-latency=176
> 	Memory window 0: 37bfd000-37ffc000 (prefetchable)
> 	Memory window 1: 20000000-203ff000
> 	I/O window 0: 0000be00-0000fdff
> 	I/O window 1: 00004000-000040ff
> 	16-bit legacy interface ports at 0001
> 
> 00:07.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 
> 
> 09)
> 	Subsystem: Intel Corporation EtherExpress PRO/100+ Management Adapter
> 	Flags: bus master, medium devsel, latency 128, IRQ 31
> 	Memory at 37bfc000 (32-bit, non-prefetchable) [size=4K]
> 	I/O ports at bdc0 [size=64]
> 	Memory at 37bc0000 (32-bit, non-prefetchable) [size=128K]
> 	Expansion ROM at <unassigned> [disabled] [size=1M]
> 	Capabilities: [dc] Power Management version 2
> 
> 00:09.0 PCI bridge: Texas Instruments: Unknown device ac23 (rev 02) (prog-if 
> 
> 00 [Normal decode])
> 	Flags: bus master, medium devsel, latency 0
> 	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> 	I/O behind bridge: 0000a000-0000afff
> 	Memory behind bridge: 37a00000-37afffff
> 	Prefetchable memory behind bridge: 37900000-379fffff
> 	Capabilities: [dc] Power Management version 1
> 
> 00:0b.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c4) (prog
> 
> -if ff)
> 	Flags: bus master, medium devsel, latency 128, IRQ 31
> 	I/O ports at 9ff8 [size=8]
> 	I/O ports at 9ff4 [size=4]
> 	I/O ports at 9fe8 [size=8]
> 	I/O ports at 9fe4 [size=4]
> 	I/O ports at 9fd0 [size=16]
>         Capabilities: [60] Power Management version 2
> 
> 00:0c.0 Non-VGA unclassified device: Acer Laboratories Inc. [ALi] M7101 PMU
>         Flags: medium devsel, IRQ 31
> 
> 00:0f.0 USB Controller: Acer Laboratories Inc. [ALi] M5237 USB (rev 03) 
> 
> (prog-if 10 [OHCI])
>         Flags: bus master, medium devsel, latency 128, IRQ 31
>         Memory at 378ff000 (32-bit, non-prefetchable) [size=4K]
>         Capabilities: [60] Power Management version 2

None of these devices look like PrismII or Prism2.5 device.
Please describe your (presumably) hostap-compatible device.
Link to manufacturer/vendor product page would be nice.

Keep hostap list CCed.
--
vda