error messages in dmesg

[Jan Satko]

Hello.

Can someone tell me what this errors means ? Broken server or client side
? I'm running hostapd with prism 2.5 in AP mode on kernel 2.4.
Thank you.

TKIP: ICV error detected: STA=00:14:bf:dc:92:30
wifi1: decryption failed (SA=00:14:bf:dc:92:30) res=-5
TKIP: ICV error detected: STA=00:14:bf:dc:92:30
wifi1: decryption failed (SA=00:14:bf:dc:92:30) res=-5
wifi1: decryption failed (SA=00:14:bf:dc:92:30) res=-5
wifi1: decryption failed (SA=00:14:bf:dc:92:30) res=-5
wifi1: decryption failed (SA=00:14:bf:dc:92:30) res=-5
wifi1: decryption failed (SA=00:14:bf:dc:92:30) res=-5
wifi1: decryption failed (SA=00:14:bf:dc:92:30) res=-5
NET: 5 messages suppressed.
TKIP: ICV error detected: STA=00:14:bf:dc:92:30
wifi1: decryption failed (SA=00:14:bf:dc:92:30) res=-5
wifi1: hfa384x_cmd: entry still in list? (entry=c7169820, type=0, res=0)
wifi1: hfa384x_cmd: command was not completed (res=0, entry=c7169820,
type=0, cmd=0x0002, param0=0x0000, EVSTAT=0000 INTEN=e09f)
wifi1: reset port failed to disable port
wifi1: hfa384x_cmd: entry still in list? (entry=c7169820, type=0, res=0)
wifi1: hfa384x_cmd: command was not completed (res=0, entry=c7169820,
type=0, cmd=0x0021, param0=0xfc28, EVSTAT=0000 INTEN=e09f)
wifi1: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fc28, len=2)
Could not read current WEP flags.
wifi1: encryption setup failed
wifi1: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wifi1: hfa384x_cmd_issue - timeout - reg=0x8021
wifi1: hfa384x_cmd: entry still in list? (entry=c71699e0, type=0, res=-1)
wifi1: hfa384x_cmd: interrupted; err=-110
wifi1: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fc28, len=2)
Could not read current WEP flags.
wifi1: encryption setup failed
wifi1: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wifi1: hfa384x_cmd_issue - timeout - reg=0x8000
wifi1: prism2_transmit: CMDCODE_TRANSMIT failed (res=-110)
wifi1: prism2_tx_80211 - to BAP0 failed
wifi1: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wifi1: hfa384x_cmd_issue - timeout - reg=0x8000
wifi1: hfa384x_cmd: entry still in list? (entry=c7169820, type=0, res=-1)
wifi1: hfa384x_cmd: interrupted; err=-110
wifi1: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fc28, len=2)
Could not read current WEP flags.
wifi1: encryption setup failed
wifi1: scheduled card reset
hostap_pci: wifi1: resetting card
wifi1: Original COR value: 0x0
prism2_hw_init: initialized in 200 ms
TKIP: ICV error detected: STA=00:14:bf:dc:92:30
wifi1: decryption failed (SA=00:14:bf:dc:92:30) res=-5
TKIP: ICV error detected: STA=00:14:bf:dc:92:30
wifi1: decryption failed (SA=00:14:bf:dc:92:30) res=-5
TKIP: ICV error detected: STA=00:14:bf:dc:92:30
wifi1: decryption failed (SA=00:14:bf:dc:92:30) res=-5
wifi1: TXEXC - status=0x0004 ([Discon]) tx_control=002c
   retry_count=0 tx_rate=55 fc=0x4208 (Data::0 FromDS)
   A1=00:14:a5:44:54:53 A2=00:60:b3:2a:15:6a A3=00:60:b3:2a:15:6a
A4=00:00:00:00:00:00
wifi1: hfa384x_cmd: entry still in list? (entry=c0f1b320, type=0, res=0)
wifi1: hfa384x_cmd: command was not completed (res=0, entry=c0f1b320,
type=0, cmd=0x0002, param0=0x0000, EVSTAT=0000 INTEN=e09f)
wifi1: reset port failed to disable port
wifi1: hfa384x_cmd: entry still in list? (entry=c7169760, type=0, res=0)
wifi1: hfa384x_cmd: command was not completed (res=0, entry=c7169760,
type=0, cmd=0x0021, param0=0xfc28, EVSTAT=0000 INTEN=e09f)
wifi1: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fc28, len=2)
Could not read current WEP flags.
wifi1: encryption setup failed
wifi1: Command completion event, but no pending commands
wifi1: Command completion event, but no pending commands
wifi1: hfa384x_cmd: entry still in list? (entry=c7169760, type=0, res=0)
wifi1: hfa384x_cmd: command was not completed (res=0, entry=c7169760,
type=0, cmd=0x0021, param0=0xfc28, EVSTAT=0000 INTEN=e09f)
wifi1: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fc28, len=2)
Could not read current WEP flags.
wifi1: encryption setup failed


Sincerely

--
   Bc. Jan 'EIS' Satko       Slovak University of Agriculture
 network & system manager            Tr. A. Hlinku 2
  Tel: +421 37 7412 616           949 76 Nitra Slovakia