wpa_supplicant 0.4.6 + ipw2200 1.0.8 , ieee80211 - 1.1.15 , kernel 2.6.16 (RHEL4U2)

Radu Brumariu radu
Mon Nov 7 09:35:13 PST 2005 

Hi list,

I am trying to use wpa_supplicant 0.4.6 but when I try to run it, it 
gives the following errors :

Initializing interface 'eth1' conf '/etc/wpa_supplicant.conf' driver 
'ipw' ctrl_interface 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
update_config=1
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group=10 (from group name 'wheel')
eapol_version=1
ap_scan=1
fast_reauth=1
Line: 394 - start of a new network block
ssid - hexdump_ascii(len=2):
     43 53                                             CS
key_mgmt: 0x1
eap methods - hexdump(len=2): 19 00
proto: 0x1
group: 0x18
identity - hexdump_ascii(len=16):
     72 61 64 75 40 63 73 2e 6b 65 6e 74 2e 65 64 75   <my username>
password - hexdump_ascii(len=7): [REMOVED]
phase2 - hexdump_ascii(len=13):
     61 75 74 68 3d 4d 53 43 48 41 50 56 32            auth=MSCHAPV2
priority=10 (0xa)
Priority group 10
   id=0 ssid='CS'
Initializing interface (2) 'eth1'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_ipw_init is called
SIOCGIWRANGE: WE(compiled)=19 WE(source)=16 enc_capa=0x0
  capabilities: key_mgmt 0x0 enc 0x3
Own MAC address: 00:0e:35:4c:ad:b0
wpa_driver_ipw_set_wpa: enabled=1
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
wpa_driver_ipw_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
Failed to set encryption.
wpa_driver_ipw_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 key_len=0
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
Failed to set encryption.
wpa_driver_ipw_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 key_len=0
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
Failed to set encryption.
wpa_driver_ipw_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 key_len=0
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
Failed to set encryption.
wpa_driver_ipw_set_countermeasures: enabled=0
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
wpa_driver_ipw_set_drop_unencrypted: enabled=1
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
Setting scan request: 0 sec 100000 usec
Using existing control interface directory.
bind(PF_UNIX): Address already in use
ctrl_iface exists, but does not allow connections - assuming it was 
leftover from forced program termination
Successfully replaced leftover ctrl_iface socket 
'/var/run/wpa_supplicant/eth1'
Added interface eth1
Wireless event: cmd=0x8b06 len=8
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Scan timeout - try to get results
Received 4095 bytes of scan results (17 BSSes)
Scan results: 17
Selecting BSS from priority group 10
0: 00:13:1a:2a:bd:21 ssid='CS Administration' wpa_ie_len=26 
rsn_ie_len=22 caps=0x11
   skip - SSID mismatch
1: 00:13:60:0c:7c:92 ssid='CS Faculty' wpa_ie_len=26 rsn_ie_len=22 caps=0x11
   skip - SSID mismatch
2: 00:13:60:0c:7c:91 ssid='CS Administration' wpa_ie_len=26 
rsn_ie_len=22 caps=0x11
   skip - SSID mismatch
3: 00:13:60:0c:7c:95 ssid='Math' wpa_ie_len=26 rsn_ie_len=22 caps=0x11
   skip - SSID mismatch
4: 00:13:60:0c:7c:94 ssid='MSB Wireless' wpa_ie_len=26 rsn_ie_len=22 
caps=0x11
   skip - SSID mismatch
5: 00:13:60:0c:7b:60 ssid='CS' wpa_ie_len=26 rsn_ie_len=22 caps=0x11
   selected based on WPA IE
Trying to associate with 00:13:60:0c:7b:60 (SSID='CS' freq=0 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
wpa_driver_ipw_set_auth_alg: auth_alg=0x1
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 1
WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50 f2 
02 01 00 00 50 f2 02 01 00 00 50 f2 01 28 00
WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 
0f ac 04 01 00 00 0f ac 01 28 00
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT 802.1X
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 
00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 01
No keys have been configured - skip key clearing
wpa_driver_ipw_set_drop_unencrypted: enabled=1
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
State: SCANNING -> ASSOCIATING
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - portControl=Auto
RSN: Ignored PMKID candidate without preauth flag
RSN: Ignored PMKID candidate without preauth flag
Wireless event: cmd=0x8b1a len=11
CTRL-EVENT-TERMINATING - signal 2 received
Removing interface eth1
State: ASSOCIATING -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_ipw_set_wpa: enabled=0
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
wpa_driver_ipw_set_drop_unencrypted: enabled=0
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
wpa_driver_ipw_set_countermeasures: enabled=0
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Operation not supported
No keys have been configured - skip key clearing
Cancelling scan request


I have the latest ipw2200 - 1.0.8, ieeee stack - 1.1.5, kernel 2.6.14.


Here is my /etc/wpa_supplicant.conf
update_config=1
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=wheel
eapol_version=1
ap_scan=1
fast_reauth=1
network={
        ssid="CS"
        key_mgmt=WPA-EAP
        eap=PEAP
        proto=WPA
        group=CCMP TKIP
        identity="<myusername>"
        password="<mypassword>"
        #phase1="peaplabel=1"
        phase2="auth=MSCHAPV2"
        priority=10
}

I have looked in the sources for the ipw2200 and it seems that the ioctl 
command that it complains about it's declared , but I don't understand 
why it doesn't work ...

Please advice.

Regards,
Radu

More information about the Hostap mailing list