In search of HOSTAP MAINTAINERS - are you hiding?

Chip Salzenberg chip
Fri Nov 4 15:23:41 PST 2005


On Fri, Nov 04, 2005 at 11:11:37PM +0100, Stefan wrote:
> Yeah, it would be really helpful if you provided more info, instead of
> saying that 2.6.14 breaks hostap driver.

This is the third message I've posted with the same log info.
Below I've quoted the previous one.

PS: If there was ever any doubt that my previous messages fell into a
    black hole, you've proved it.

--------------------------------------------------------------------------
Date: Tue, 1 Nov 2005 18:58:44 -0800
From: Chip Salzenberg <chip at pobox.com>
To: hostap at shmoo.com
Subject: "wifi0: interrupt delivery does not seem to work"
Message-ID: <20051102025844.GA6610 at tytlal.topaz.cx>
References: <20051031013349.GA24013 at tytlal.topaz.cx> <20051031235200.GH6993 at tytlal.topaz.cx>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20051031235200.GH6993 at tytlal.topaz.cx>
User-Agent: Mutt/1.5.11
Status: RO
Content-Length: 2448
Lines: 39

Version 0.3.9 under kernel 2.6.12 works fine.

Version 0.4.4-kernel included with kernel 2.6.14 does not work, nor
does version 0.4.1 compiled separately; there seems to be a problem
with interrupt delivery.  As long as the module is installed,
keystrokes and all other interrupt-driven activity pause for a LONG
time.  In fact, often keystrokes will auto-repeat as the interrupt for
the key-raise event gets delayed.

C'mon guys, anybody have a clue here?  Anybody?  I'd like to use the
2.6.14 kernel, but hostap is holding back the upgrade.

Oct 29 16:34:11 tytlal kernel: usb 2-1: new full speed USB device using uhci_hcd and address 3
Oct 29 16:34:11 tytlal kernel: usb 2-1: configuration #1 chosen from 2 choices
Oct 29 16:34:11 tytlal kernel: cdc_acm 2-1:1.0: ttyACM0: USB ACM device
Oct 29 16:34:23 tytlal kernel: hostap_cs: 0.4.4-kernel (Jouni Malinen <jkmaline at cc.hut.fi>)
Oct 29 16:34:23 tytlal kernel: hostap_cs: Registered netdevice wifi0
Oct 29 16:34:23 tytlal kernel: hostap_cs: index 0x01: Vcc 3.3, irq 3, io 0x4100-0x413f
Oct 29 16:34:23 tytlal kernel: wifi0: NIC: id=0x800c v1.0.0
Oct 29 16:34:23 tytlal kernel: wifi0: PRI: id=0x15 v1.1.1
Oct 29 16:34:23 tytlal kernel: wifi0: STA: id=0x1f v1.8.4
Oct 29 16:34:26 tytlal kernel: wifi0: Interrupt, but SWSUPPORT0 does not match: 0000 != 8A32 - card removed?
Oct 29 16:34:26 tytlal kernel: hostap_cs: wifi0: resetting card
Oct 29 16:34:42 tytlal pppd[6511]: tcsetattr: No such device or address (line 1010)
Oct 29 16:34:42 tytlal pppd[6511]: Exit.
Oct 29 16:35:57 tytlal kernel: wifi0: interrupt delivery does not seem to work
Oct 29 16:35:57 tytlal kernel: wifi0: cnfAuthentication setting to 0x1 failed
Oct 29 16:37:03 tytlal kernel: hostap_cs: Registered netdevice wifi0
Oct 29 16:37:03 tytlal kernel: hostap_cs: index 0x01: Vcc 3.3, irq 3, io 0x4100-0x413f
Oct 29 16:37:03 tytlal kernel: wifi0: NIC: id=0x800c v1.0.0
Oct 29 16:37:03 tytlal kernel: wifi0: PRI: id=0x15 v1.1.1
Oct 29 16:37:03 tytlal kernel: wifi0: STA: id=0x1f v1.8.4
Oct 29 16:37:05 tytlal kernel: wifi0: Interrupt, but SWSUPPORT0 does not match: 0000 != 8A32 - card removed?
Oct 29 16:37:05 tytlal kernel: hostap_cs: wifi0: resetting card
Oct 29 16:37:10 tytlal kernel: hostap_cs: wifi0: resetting card
Oct 29 16:37:16 tytlal kernel: wifi0: Interrupt, but SWSUPPORT0 does not match: 0000 != 8A32 - card removed?
Oct 29 16:37:16 tytlal kernel: hostap_cs: wifi0: resetting card
-- 
Chip Salzenberg <chip at pobox.com>
--------------------------------------------------------------------------

-- 
Chip Salzenberg <chip at pobox.com>




More information about the Hostap mailing list