trouble at hostapd+madwifi paradise :|

Thu Jun 30 10:33:30 PDT 2005

hello!

i'm afraid wep is broken with the current BSD branch. please try an earlier 
version (maybe end of may)...

bruno

On Thursday 30 June 2005 19:25, Andr? Lemos wrote:
> this used to work with exactly this setup, so I can only imagine the
> problem is within either madwifi-bsd-cvs or hostapd since even on
> another completely different machine I get exactly the same.
>
> this is hostapd with 802.1x (using wep for the keys).
>
> and hansen wrote:
> >I have never used wep and hostapd
> >but a little check list:
> >update your openssl
> >update your wireless tools
> >let the dog out, if it barks
> >use freeradius cvs head branch
> >start radiusd whit -X for debug messages
> >(perhaps update your kernel)
> >
> >/Lasse
> >
> >--- Andr? Lemos wrote:
> >>I'm sending the detailed log, perhaps you can shed
> >>some light over this
> >>
> >>I'm using CVS versions of hostapd and madwifi-bsd
> >>branch from _now_
> >>
> >>
> >>Thanks
> >>
> >>Ps.: the Radius server never gets contacted in the
> >>process
> >>
> >>and hansen wrote:
> >>>try starting with hostapd /etc/hostapd.conf -dd
> >>>and
> >>>wpa_supplicant -i ath0 -c /etc/wpa_supplicant.conf
> >>
> >>-dd
> >>
> >>>--- Andr? Lemos wrote:
> >>>>How can I debug this? It works on one machine, but
> >>>>it gives me on
> >>>>another. (different kernel and libs). Do you have
> >>
> >>a
> >>
> >>>>working version of
> >>>>this guys doing along together just fine? Could
> >>
> >>you
> >>
> >>>>send me the tarball
> >>>>of the snapshots?
> >>>>
> >>>>
> >>>>thanks
> >>>>
> >>>>Wireless event: cmd=0x8c04 len=20
> >>>>ath0: STA 00:02:6f:20:c0:98 IEEE 802.11:
> >>>>deassociated
> >>>>ath0: STA 00:02:6f:20:c0:98 WPA: event 2
> >>>>notification
> >>>>IEEE 802.1X: station 00:02:6f:20:c0:98 port
> >>
> >>disabled
> >>
> >>>>DISCLAIMER: This message may contain confidential
> >>>>information or privileged material and is intended
> >>>>only for the individual(s) named. If you are not a
> >>>>named addressee and mistakenly received this
> >>
> >>message
> >>
> >>>>you should not copy or otherwise disseminate it:
> >>>>please delete this e-mail from your system and
> >>>>notify the sender immediately. E-mail
> >>
> >>transmissions
> >>
> >>>>are not guaranteed to be secure or error-free as
> >>>>information could be intercepted, corrupted, lost,
> >>>>destroyed, arrive late or incomplete or contain
> >>>>viruses. Therefore, the sender does not accept
> >>>>liability for any errors or omissions in the
> >>>>contents of this message that arise as a result of
> >>>>e-mail transmissions. Please request a hard copy
> >>>>version if verification is required. Critical
> >>>>Software.
> >>>>
> >>>>>_______________________________________________
> >>>>
> >>>>HostAP mailing list
> >>>>HostAP at shmoo.com
> >>>>http://lists.shmoo.com/mailman/listinfo/hostap
> >>>
> >>>_______________________________________________
> >>>HostAP mailing list
> >>>HostAP at shmoo.com
> >>>http://lists.shmoo.com/mailman/listinfo/hostap
> >>
> >>DISCLAIMER: This message may contain confidential
> >>information or privileged material and is intended
> >>only for the individual(s) named. If you are not a
> >>named addressee and mistakenly received this message
> >>you should not copy or otherwise disseminate it:
> >>please delete this e-mail from your system and
> >>notify the sender immediately. E-mail transmissions
> >>are not guaranteed to be secure or error-free as
> >>information could be intercepted, corrupted, lost,
> >>destroyed, arrive late or incomplete or contain
> >>viruses. Therefore, the sender does not accept
> >>liability for any errors or omissions in the
> >>contents of this message that arise as a result of
> >>e-mail transmissions. Please request a hard copy
> >>version if verification is required. Critical
> >>Software.
> >>
> >>>lapy hostapd # ./hostapd -ddd config.conf
> >>
> >>Configuration file: config.conf
> >>madwifi_set_iface_flags: dev_up=0
> >>Using interface ath0 with hwaddr 00:20:a6:57:3e:6f
> >>and ssid 'campeao2'
> >>ath0: RADIUS Authentication server
> >>192.168.3.159:1812
> >>ath0: RADIUS Accounting server 192.168.3.159:1813
> >>madwifi_set_ieee8021x: enabled=1
> >>madwifi_set_iface_flags: dev_up=1
> >>madwifi_del_key: addr=00:00:00:00:00:00 key_idx=0
> >>madwifi_del_key: addr=00:00:00:00:00:00 key_idx=1
> >>madwifi_del_key: addr=00:00:00:00:00:00 key_idx=2
> >>madwifi_del_key: addr=00:00:00:00:00:00 key_idx=3
> >>IEEE 802.1X: New default WEP key index 2
> >>IEEE 802.1X: New default WEP key - hexdump(len=13):
> >>db 55 9c 12 81 40 79 d8 17 cb 83 bc bb
> >>madwifi_set_key: alg=WEP addr=00:00:00:00:00:00
> >>key_idx=2
> >>ath0: RADIUS Sending RADIUS message to accounting
> >>server
> >>RADIUS message: code=4 (Accounting-Request)
> >>identifier=0 length=66
> >>   Attribute 40 (Acct-Status-Type) length=6
> >>      Value: 7
> >>   Attribute 45 (Acct-Authentic) length=6
> >>      Value: 1
> >>   Attribute 30 (Called-Station-Id) length=28
> >>      Value: '00-20-A6-57-3E-6F:campeao2'
> >>   Attribute 49 (Acct-Terminate-Cause) length=6
> >>      Value: 11
> >>ath0: RADIUS Next RADIUS client retransmit in 3
> >>seconds
> >>
> >>Flushing old station entries
> >>madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff
> >>reason_code=3
> >>Deauthenticate all stations
> >>l2_packet_receive - recv: Network is down
> >>ath0: RADIUS Received 20 bytes from RADIUS server
> >>ath0: RADIUS Received RADIUS message
> >>RADIUS message: code=5 (Accounting-Response)
> >>identifier=0 length=20
> >>ath0: STA 00:00:00:00:00:00 RADIUS: Received RADIUS
> >>packet matched with a pending request, round trip
> >>time 0.01 sec
> >>Wireless event: cmd=0x8b19 len=12
> >>Wireless event: cmd=0x8c03 len=20
> >>ath0: STA 00:02:6f:20:c0:98 IEEE 802.11: associated
> >>  New STA
> >>ath0: STA 00:02:6f:20:c0:98 WPA: event 1
> >>notification
> >>ath0: STA 00:02:6f:20:c0:98 IEEE 802.1X: start
> >>authentication
> >>IEEE 802.1X: 00:02:6f:20:c0:98 AUTH_PAE entering
> >>state INITIALIZE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 BE_AUTH entering
> >>state INITIALIZE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 REAUTH_TIMER entering
> >>state INITIALIZE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 AUTH_KEY_TX entering
> >>state NO_KEY_TRANSMIT
> >>IEEE 802.1X: 00:02:6f:20:c0:98 KEY_RX entering state
> >>NO_KEY_RECEIVE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 CTRL_DIR entering
> >>state IN_OR_BOTH
> >>IEEE 802.1X: 00:02:6f:20:c0:98 AUTH_PAE entering
> >>state INITIALIZE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 BE_AUTH entering
> >>state IDLE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 KEY_RX entering state
> >>NO_KEY_RECEIVE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 CTRL_DIR entering
> >>state FORCE_BOTH
> >>IEEE 802.1X: 00:02:6f:20:c0:98 AUTH_PAE entering
> >>state DISCONNECTED
> >>ath0: STA 00:02:6f:20:c0:98 IEEE 802.1X:
> >>unauthorizing port
> >>madwifi_set_sta_authorized: addr=00:02:6f:20:c0:98
> >>authorized=0
> >>IEEE 802.1X: 00:02:6f:20:c0:98 REAUTH_TIMER entering
> >>state INITIALIZE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 AUTH_PAE entering
> >>state RESTART
> >>IEEE 802.1X: station 00:02:6f:20:c0:98 - new auth
> >>session, clearing State
> >>IEEE 802.1X: Generated EAP Request-Identity for
> >>00:02:6f:20:c0:98 (identifier 0, timeout 30)
> >>IEEE 802.1X: 00:02:6f:20:c0:98 REAUTH_TIMER entering
> >>state INITIALIZE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 AUTH_PAE entering
> >>state CONNECTING
> >>IEEE 802.1X: 00:02:6f:20:c0:98 REAUTH_TIMER entering
> >>state INITIALIZE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 AUTH_PAE entering
> >>state AUTHENTICATING
> >>IEEE 802.1X: 00:02:6f:20:c0:98 BE_AUTH entering
> >>state REQUEST
> >>IEEE 802.1X: Sending EAP Packet to 00:02:6f:20:c0:98
> >>(identifier 0)
> >>TX EAPOL - hexdump(len=23): 00 02 6f 20 c0 98 00 20
> >>a6 57 3e 6f 88 8e 02 00 00 05 01 00 00 05 01
> >>IEEE 802.1X: 00:02:6f:20:c0:98 REAUTH_TIMER entering
> >>state INITIALIZE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 REAUTH_TIMER entering
> >>state INITIALIZE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 REAUTH_TIMER entering
> >>state INITIALIZE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 REAUTH_TIMER entering
> >>state INITIALIZE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 REAUTH_TIMER entering
> >>state INITIALIZE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 REAUTH_TIMER entering
> >>state INITIALIZE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 REAUTH_TIMER entering
> >>state INITIALIZE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 REAUTH_TIMER entering
> >>state INITIALIZE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 REAUTH_TIMER entering
> >>state INITIALIZE
> >>
> >>
> >>(............)
> >>
> >>
> >>ath0: STA 00:02:6f:20:c0:98 IEEE 802.1X: EAP timeout
> >>IEEE 802.1X: 00:02:6f:20:c0:98 BE_AUTH entering
> >>state TIMEOUT
> >>IEEE 802.1X: 00:02:6f:20:c0:98 REAUTH_TIMER entering
> >>state INITIALIZE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 AUTH_PAE entering
> >>state ABORTING
> >>IEEE 802.1X: 00:02:6f:20:c0:98 BE_AUTH entering
> >>state INITIALIZE
> >>ath0: STA 00:02:6f:20:c0:98 IEEE 802.1X: aborting
> >>authentication
> >>IEEE 802.1X: 00:02:6f:20:c0:98 REAUTH_TIMER entering
> >>state INITIALIZE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 AUTH_PAE entering
> >>state RESTART
> >>IEEE 802.1X: station 00:02:6f:20:c0:98 - new auth
> >>session, clearing State
> >>IEEE 802.1X: Generated EAP Request-Identity for
> >>00:02:6f:20:c0:98 (identifier 1, timeout 30)
> >>IEEE 802.1X: 00:02:6f:20:c0:98 BE_AUTH entering
> >>state IDLE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 REAUTH_TIMER entering
> >>state INITIALIZE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 AUTH_PAE entering
> >>state CONNECTING
> >>IEEE 802.1X: 00:02:6f:20:c0:98 REAUTH_TIMER entering
> >>state INITIALIZE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 AUTH_PAE entering
> >>state AUTHENTICATING
> >>IEEE 802.1X: 00:02:6f:20:c0:98 BE_AUTH entering
> >>state REQUEST
> >>IEEE 802.1X: Sending EAP Packet to 00:02:6f:20:c0:98
> >>(identifier 1)
> >>TX EAPOL - hexdump(len=23): 00 02 6f 20 c0 98 00 20
> >>a6 57 3e 6f 88 8e 02 00 00 05 01 01 00 05 01
> >>IEEE 802.1X: 00:02:6f:20:c0:98 REAUTH_TIMER entering
> >>state INITIALIZE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 REAUTH_TIMER entering
> >>state INITIALIZE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 REAUTH_TIMER entering
> >>state INITIALIZE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 REAUTH_TIMER entering
> >>state INITIALIZE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 REAUTH_TIMER entering
> >>state INITIALIZE
> >>
> >>(..............)
> >>
> >>ath0: STA 00:02:6f:20:c0:98 IEEE 802.1X: EAP timeout
> >>IEEE 802.1X: 00:02:6f:20:c0:98 BE_AUTH entering
> >>state TIMEOUT
> >>IEEE 802.1X: 00:02:6f:20:c0:98 REAUTH_TIMER entering
> >>state INITIALIZE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 AUTH_PAE entering
> >>state ABORTING
> >>IEEE 802.1X: 00:02:6f:20:c0:98 BE_AUTH entering
> >>state INITIALIZE
> >>ath0: STA 00:02:6f:20:c0:98 IEEE 802.1X: aborting
> >>authentication
> >>IEEE 802.1X: 00:02:6f:20:c0:98 REAUTH_TIMER entering
> >>state INITIALIZE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 AUTH_PAE entering
> >>state RESTART
> >>IEEE 802.1X: station 00:02:6f:20:c0:98 - new auth
> >>session, clearing State
> >>IEEE 802.1X: Generated EAP Request-Identity for
> >>00:02:6f:20:c0:98 (identifier 2, timeout 30)
> >>IEEE 802.1X: 00:02:6f:20:c0:98 BE_AUTH entering
> >>state IDLE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 REAUTH_TIMER entering
> >>state INITIALIZE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 AUTH_PAE entering
> >>state CONNECTING
> >>IEEE 802.1X: 00:02:6f:20:c0:98 REAUTH_TIMER entering
> >>state INITIALIZE
> >>IEEE 802.1X: 00:02:6f:20:c0:98 AUTH_PAE entering
> >>state
> >
> >=== message truncated ===
> >
> >_______________________________________________
> >HostAP mailing list
> >HostAP at shmoo.com
> >http://lists.shmoo.com/mailman/listinfo/hostap
>
> DISCLAIMER: This message may contain confidential information or privileged
> material and is intended only for the individual(s) named. If you are not a
> named addressee and mistakenly received this message you should not copy or
> otherwise disseminate it: please delete this e-mail from your system and
> notify the sender immediately. E-mail transmissions are not guaranteed to
> be secure or error-free as information could be intercepted, corrupted,
> lost, destroyed, arrive late or incomplete or contain viruses. Therefore,
> the sender does not accept liability for any errors or omissions in the
> contents of this message that arise as a result of e-mail transmissions.
> Please request a hard copy version if verification is required. Critical
> Software.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
Url : http://lists.shmoo.com/pipermail/hostap/attachments/20050630/afa2ea90/attachment.pgp 