madwifi+hostapd

[Jouni Malinen]

On Tue, May 31, 2005 at 04:42:54PM +0200, and hansen wrote:

> There is a very big output file at this website
> http://www.nethost.dk/debug_dump.txt

You are configuring the AP to use bridging, i.e., ath0 is in a bridge.
However, your hostapd.conf is not configured for this. You will need to
add bridge=br0 line into hostapd.conf in this kind of network
configuration.

-- 
Jouni Malinen                                            PGP id EFC895FA