well, now I've hosed it good

Jouni Malinen jkmaline
Sat Jun 4 16:44:46 PDT 2005

On Sat, Jun 04, 2005 at 02:20:43PM -0700, Bruce Ferrell wrote:

> I was attempting to do was load the 1.7.4 firmware

> Before flash attempt:
>   wifi0: NIC: id=0x8013 v1.0.0
>   wifi0: PRI: id=0x15 v1.1.0
>   wifi0: STA: id=0x1f v1.4.2

> After flash:
> wifi0: NIC: id=0x8013 v1.0.0
> wifi0: PRI: id=0x15 v1.1.1
> Could not get RID for component STA
> wifi0: Failed to read STA f/w version - only Primary f/w present

It looks like you downloaded a newer version of primary firmware, but
not secondary/station firmware.

>  From my reading, if I can find someone with a similar device I may have 
> a chance to ressurect this one.  Given the difficulty in finding Prism2 
> devices, I'd really like to do that.

I would just try to download a station firmware. If the driver is able
to get primary firmware running (and it looks like that), this should be
possible to do with prism2_srec.

Jouni Malinen                                            PGP id EFC895FA

More information about the Hostap mailing list