T-mobile WPA

Wed Jul 20 07:36:06 PDT 2005

Here's my latest session. It looks like we're making some progress, but I'd 
appreciate some
guidance.....

Initializing interface 'ath0' conf '/etc/wpa_supplicant.conf' driver 
'madwifi'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group=0
eapol_version=1
ap_scan=1
fast_reauth=1
Priority group 0
id=0 ssid='try-to-break-in'
id=1 ssid='tmobile1x'
Initializing interface (2) 'ath0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Own MAC address: xx:xx:xx:xx:xx:xx
wpa_driver_madwifi_del_key: keyidx=0
wpa_driver_madwifi_del_key: keyidx=1
wpa_driver_madwifi_del_key: keyidx=2
wpa_driver_madwifi_del_key: keyidx=3
wpa_driver_madwifi_set_countermeasures: enabled=0
wpa_driver_madwifi_set_drop_unencrypted: enabled=1
Setting scan request: 0 sec 100000 usec
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=9):
74 6d 6f 62 69 6c 65 31 78 tmobile1x 
Wireless event: cmd=0x8b1a len=22
Wireless event: cmd=0x8b19 len=12
Received 207 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 0
0: 00:0e:83:ed:91:af ssid='tmobile1x' wpa_ie_len=24 rsn_ie_len=0
skip - SSID mismatch
selected
Trying to associate with 00:0e:83:ed:91:af (SSID='tmobile1x' freq=2412 MHz)
Cancelling scan request
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 1
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT 802.1X
WPA: Own WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 
00 50 f2 02 01 00 00 50 f2 01
No keys have been configured - skip key clearing
wpa_driver_madwifi_set_drop_unencrypted: enabled=1
wpa_driver_madwifi_associate
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - portControl=Auto
Wireless event: cmd=0x8b1a len=22
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:0e:83:ed:91:af
Association event - clear replay counter
Associated to a new BSS: BSSID=00:0e:83:ed:91:af
No keys have been configured - skip key clearing
Associated with 00:0e:83:ed:91:af
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: txStart
EAPOL: SUPP_BE entering state IDLE
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
Setting authentication timeout: 10 sec 0 usec
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
RX EAPOL from 00:0e:83:ed:91:af
Setting authentication timeout: 70 sec 0 usec
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_PAE entering state RESTART
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request method=1 id=1
EAP: EAP entering state IDENTITY
EAP: EAP-Request Identity data - hexdump_ascii(len=0):
EAP: using anonymous identity - hexdump_ascii(len=8):
68 6e 61 70 61 72 73 74 hnaparst 
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
EAPOL: SUPP_BE entering state RECEIVE
WPA: EAPOL frame too short, len 46, expecting at least 99
RX EAPOL from 00:0e:83:ed:91:af
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request method=1 id=2
EAP: EAP entering state IDENTITY
EAP: EAP-Request Identity data - hexdump_ascii(len=0):
EAP: using anonymous identity - hexdump_ascii(len=8):
68 6e 61 70 61 72 73 74 hnaparst 
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
EAPOL: SUPP_BE entering state RECEIVE
WPA: EAPOL frame too short, len 46, expecting at least 99
RX EAPOL from 00:0e:83:ed:91:af
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request method=21 id=3
EAP: EAP entering state GET_METHOD
EAP: initialize selected EAP method (21, TTLS)
EAP-TTLS: Phase2 type: EAP
EAP-TTLS: Phase2 EAP types - hexdump(len=5): 04 1a 06 05 11
EAP: EAP entering state METHOD
EAP-TTLS: Received packet(len=6) - Flags 0x20
EAP-TTLS: Start
SSL: (where=0x10 ret=0x1)
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:before/connect initialization
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:SSLv3 write client hello A
SSL: (where=0x1002 ret=0xffffffff)
SSL: SSL_connect:error in SSLv3 read server hello A
SSL: SSL_connect - want more data
SSL: 100 bytes pending from ssl_out
SSL: 100 bytes left to be sent out (of total 100 bytes)
EAP: method process -> ignore=FALSE methodState=CONT decision=FAIL
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
EAPOL: SUPP_BE entering state RECEIVE
WPA: EAPOL frame too short, len 46, expecting at least 99
RX EAPOL from 00:0e:83:ed:91:af
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request method=21 id=4
EAP: EAP entering state METHOD
EAP-TTLS: Received packet(len=1020) - Flags 0xc0
EAP-TTLS: TLS Message Length: 2744
SSL: Need 1734 bytes more input data
SSL: Building ACK
EAP: method process -> ignore=FALSE methodState=CONT decision=FAIL
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
EAPOL: SUPP_BE entering state RECEIVE
IEEE 802.1X RX: version=1 type=0 length=1020
WPA: EAPOL frame (type 0) discarded, not a Key frame
RX EAPOL from 00:0e:83:ed:91:af
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request method=21 id=5
EAP: EAP entering state METHOD
EAP-TTLS: Received packet(len=1020) - Flags 0x40
SSL: Need 720 bytes more input data
SSL: Building ACK
EAP: method process -> ignore=FALSE methodState=CONT decision=FAIL
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
EAPOL: SUPP_BE entering state RECEIVE
IEEE 802.1X RX: version=1 type=0 length=1020
WPA: EAPOL frame (type 0) discarded, not a Key frame
RX EAPOL from 00:0e:83:ed:91:af
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request method=21 id=6
EAP: EAP entering state METHOD
EAP-TTLS: Received packet(len=726) - Flags 0x00
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:SSLv3 read server hello A
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:SSLv3 read server certificate A
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:SSLv3 read server key exchange A
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:SSLv3 read server certificate request A
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:SSLv3 read server done A
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:SSLv3 write client certificate A
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:SSLv3 write client key exchange A
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:SSLv3 write change cipher spec A
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:SSLv3 write finished A
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:SSLv3 flush data
SSL: (where=0x1002 ret=0xffffffff)
SSL: SSL_connect:error in SSLv3 read finished A
SSL: SSL_connect - want more data
SSL: 202 bytes pending from ssl_out
SSL: 202 bytes left to be sent out (of total 202 bytes)
EAP: method process -> ignore=FALSE methodState=CONT decision=FAIL
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
EAPOL: SUPP_BE entering state RECEIVE
IEEE 802.1X RX: version=1 type=0 length=726
WPA: EAPOL frame (type 0) discarded, not a Key frame
RX EAPOL from 00:0e:83:ed:91:af
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request method=21 id=7
EAP: EAP entering state METHOD
EAP-TTLS: Received packet(len=61) - Flags 0x80
EAP-TTLS: TLS Message Length: 51
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:SSLv3 read finished A
SSL: (where=0x20 ret=0x1)
SSL: (where=0x1002 ret=0x1)
SSL: 0 bytes pending from ssl_out
SSL: No data to be sent out
EAP-TTLS: TLS done, proceed to Phase 2
EAP-TTLS: Derived key - hexdump(len=64): [REMOVED]
EAP-TTLS: received 0 bytes encrypted data for Phase 2
EAP-TTLS: empty data in beginning of Phase 2 - use fake EAP-Request Identity
EAP-TTLS: Phase 2 EAP Request: type=1
EAP: using real identity - hexdump_ascii(len=8):
68 6e 61 70 61 72 73 74 hnaparst 
EAP-TTLS: AVP encapsulate EAP Response - hexdump(len=13): 02 07 00 0d 01 68 
6e 61 70 61 72 73 74
EAP-TTLS: Encrypting Phase 2 data - hexdump(len=24): [REMOVED]
EAP: method process -> ignore=FALSE methodState=CONT decision=FAIL
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
EAPOL: SUPP_BE entering state RECEIVE
WPA: EAPOL frame too short, len 65, expecting at least 99
RX EAPOL from 00:0e:83:ed:91:af
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Failure
EAP: EAP entering state DISCARD
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RECEIVE
WPA: EAPOL frame too short, len 46, expecting at least 99
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:00:00:00:00:00
Setting scan request: 0 sec 100000 usec
Added BSSID 00:0e:83:ed:91:af into blacklist
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portValid=0
Disconnect event - remove keys
wpa_driver_madwifi_del_key: keyidx=0
wpa_driver_madwifi_del_key: keyidx=1
wpa_driver_madwifi_del_key: keyidx=2
wpa_driver_madwifi_del_key: keyidx=3
wpa_driver_madwifi_del_key: keyidx=0
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
Starting AP scan (broadcast SSID)

On 7/17/05, Sebastian Weitzel <togg at togg.de> wrote:
> 
> Zitat von Harold Naparst <hnaparst at gmail.com>:
> 
> > I'm trying to connect to T-mobile's 802.1x network, but I'm obviously
> > confused.
> > Here's my session: Also, I tried to reply to the thread in the mailing 
> list,
> > but I'm not
> > even sure how to do that...
> 
> It looks like the tmobile networks have no wpa encryption. The
> capabilities of the ap (beacons) don't show that wpa is enabled. Maybe
> they are only wep encrypted or open?
> 
> 
> --
> Regards,
> Sebastian Weitzel
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20050720/5a09dee6/attachment.htm 