Changing rx recieve threshold
Tue Jul 19 08:56:31 PDT 2005
The link I found for the patch did not work. I did however read that
this patch was not submitted to the tree, any reason why not?
Ofcourse, does anyone know of anything else I can do to control rx sens?
On 7/18/05, Joe Parks <jphstap at roinet.com> wrote:
> Denis Vlasenko submitted a patch to the list for an older version of the driver some time ago that allows a much wider range of configuration for receive sensitivity. I had intended to test the patch myself, but never got around to it.
> If you search the archives from August '04 for "Received signal strength" you should find it.
> On Sun, 17 Jul 2005 01:05:26 -0500
> Andrew Hodel <andrewhodel at gmail.com> wrote:
> > BTW,
> > This is the only thing I can find other subject other then `iwconfig
> > sens [1,2,3]`. I would like to be able to set the threshold to around
> > -70, does anyone know what it is by default?
> > http://lists.shmoo.com/pipermail/hostap/2003-June/003284.html
> > firmware STA 1.5.6 is what I am using, 1.7.4 seems to have problems in
> > ad-hoc, won't tx/rx packets over ~100 bytes, haven't tried 1.8.4
> > yet...
> > Andrew
> > On 7/17/05, Andrew Hodel <andrewhodel at gmail.com> wrote:
> > > Is there anyway with prism and hostap I can change the rx receive
> > > threshold, ad-hoc mode 40+ nodes (mesh) if it makes a difference.
> > >
> > >
> > >
> > > Thanks,
> > > Andrew
> > >
> > _______________________________________________
> > HostAP mailing list
> > HostAP at shmoo.com
> > http://lists.shmoo.com/mailman/listinfo/hostap
More information about the Hostap