Trouble using wpa_supplicant+ipw2100 on Ubuntu w Linksys WRT54G

[Ian McDonald]

Have you typed something like:
ifconcfig wlan0 up

before starting wpa_supplicant? The error that you have is the same
one I had when I hadn't done that.....


On Mon, 24 Jan 2005 01:57:03 +0000, Alex Willmer <alex at moreati.org.uk> wrote:
> I'm trying to configure my laptop to connect wirelessly to my Linksys
> WRT54G using WPA-PSK (TKIP). The router is configured and I can connect
> without problems using Windows XP.
> 
> I'm trying with the latest development version of wpa_supplicant
> (0.3.4), ipw2100 1.0.2, ipw2100 firmware 1.3, kernel 2.6.8.1,
> wireless-tools 27pre22.
> 
> Below is what I think is the point of failure (finds AP, doesn't
> negotiate crypto):
> 
> Trying to associate with 00:0f:66:d3:78:80 (SSID='moreati.org.uk' freq=0 MHz)
> Cancelling scan request
> Automatic auth_alg selection: 0x1
> wpa_driver_ipw2100_set_auth_alg: auth_alg=0x1
> WPA: using IEEE 802.11i/D3.0
> WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
> WPA: using GTK TKIP
> WPA: using PTK TKIP
> WPA: using KEY_MGMT WPA-PSK
> WPA: Own WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
> No keys have been configured - skip key clearing
> wpa_driver_ipw2100_set_drop_unencrypted: enabled=1
> Setting authentication timeout: 5 sec 0 usec
> Wireless event: cmd=0x8b1a len=27
> Authentication with 00:00:00:00:00:00 timed out.
> No keys have been configured - skip key clearing
> Setting scan request: 0 sec 0 usec
> Starting AP scan (broadcast SSID)
> Scan timeout - try to get results
> Received 301 bytes of scan results (1 BSSes)
> Scan results: 1
> Selecting BSS from priority group 0
> 0: 00:0f:66:d3:78:80 ssid='moreati.org.uk' wpa_ie_len=24 rsn_ie_len=0
>    selected
> 
> After this i loops (find AP, try to authenticate etc).
> 
> Full outpput is attached.
> 
> Can anyone help me resolve this?
> 
> With thanks
> 
> Alex
> 
> 
> root at martha:/ # /usr/local/bin/wpa_supplicant -i eth1 -c /etc/wpa_supplicant.con f -dd -Dipw2100
> Initializing interface 'eth1' conf '/etc/wpa_supplicant.conf' driver 'ipw2100'
> Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
> Reading configuration file '/etc/wpa_supplicant.conf'
> Line: 1 - start of a new network block
> ssid - hexdump_ascii(len=14):
>      6d 6f 72 65 61 74 69 2e 6f 72 67 2e 75 6b         moreati.org.uk
> proto: 0x1
> key_mgmt: 0x2
> PSK (ASCII passphrase) - hexdump_ascii(len=13): [REMOVED]
> PSK (from passphrase) - hexdump(len=32): [REMOVED]
> Priority group 0
>    id=0 ssid='moreati.org.uk'
> Initializing interface (2) 'eth1'
> Own MAC address: 00:04:23:6b:34:75
> wpa_driver_ipw2100_set_wpa: enabled=1
> wpa_driver_ipw2100_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
> wpa_driver_ipw2100_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 key_len=0
> wpa_driver_ipw2100_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 key_len=0
> wpa_driver_ipw2100_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 key_len=0
> wpa_driver_ipw2100_set_countermeasures: enabled=0
> wpa_driver_ipw2100_set_drop_unencrypted: enabled=1
> Setting scan request: 0 sec 100000 usec
> Starting AP scan (broadcast SSID)
> Scan timeout - try to get results
> Received 300 bytes of scan results (1 BSSes)
> Scan results: 1
> Selecting BSS from priority group 0
> 0: 00:0f:66:d3:78:80 ssid='moreati.org.uk' wpa_ie_len=24 rsn_ie_len=0
>    selected
> Trying to associate with 00:0f:66:d3:78:80 (SSID='moreati.org.uk' freq=0 MHz)
> Cancelling scan request
> Automatic auth_alg selection: 0x1
> wpa_driver_ipw2100_set_auth_alg: auth_alg=0x1
> WPA: using IEEE 802.11i/D3.0
> WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
> WPA: using GTK TKIP
> WPA: using PTK TKIP
> WPA: using KEY_MGMT WPA-PSK
> WPA: Own WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
> No keys have been configured - skip key clearing
> wpa_driver_ipw2100_set_drop_unencrypted: enabled=1
> Setting authentication timeout: 5 sec 0 usec
> Wireless event: cmd=0x8b1a len=27
> Authentication with 00:00:00:00:00:00 timed out.
> No keys have been configured - skip key clearing
> Setting scan request: 0 sec 0 usec
> Starting AP scan (broadcast SSID)
> Scan timeout - try to get results
> Received 301 bytes of scan results (1 BSSes)
> Scan results: 1
> Selecting BSS from priority group 0
> 0: 00:0f:66:d3:78:80 ssid='moreati.org.uk' wpa_ie_len=24 rsn_ie_len=0
>    selected
> Trying to associate with 00:0f:66:d3:78:80 (SSID='moreati.org.uk' freq=0 MHz)
> Cancelling scan request
> Automatic auth_alg selection: 0x1
> wpa_driver_ipw2100_set_auth_alg: auth_alg=0x1
> WPA: using IEEE 802.11i/D3.0
> WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
> WPA: using GTK TKIP
> WPA: using PTK TKIP
> WPA: using KEY_MGMT WPA-PSK
> WPA: Own WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
> No keys have been configured - skip key clearing
> wpa_driver_ipw2100_set_drop_unencrypted: enabled=1
> Setting authentication timeout: 5 sec 0 usec
> Wireless event: cmd=0x8b1a len=27
> Authentication with 00:00:00:00:00:00 timed out.
> No keys have been configured - skip key clearing
> Setting scan request: 0 sec 0 usec
> Starting AP scan (broadcast SSID)
> Scan timeout - try to get results
> Received 301 bytes of scan results (1 BSSes)
> Scan results: 1
> Selecting BSS from priority group 0
> 0: 00:0f:66:d3:78:80 ssid='moreati.org.uk' wpa_ie_len=24 rsn_ie_len=0
>    selected
> Trying to associate with 00:0f:66:d3:78:80 (SSID='moreati.org.uk' freq=0 MHz)
> Cancelling scan request
> Automatic auth_alg selection: 0x1
> wpa_driver_ipw2100_set_auth_alg: auth_alg=0x1
> WPA: using IEEE 802.11i/D3.0
> WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
> WPA: using GTK TKIP
> WPA: using PTK TKIP
> WPA: using KEY_MGMT WPA-PSK
> WPA: Own WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
> No keys have been configured - skip key clearing
> wpa_driver_ipw2100_set_drop_unencrypted: enabled=1
> Setting authentication timeout: 5 sec 0 usec
> Wireless event: cmd=0x8b1a len=27
> Authentication with 00:00:00:00:00:00 timed out.
> No keys have been configured - skip key clearing
> Setting scan request: 0 sec 0 usec
> Starting AP scan (broadcast SSID)
> Scan timeout - try to get results
> Received 300 bytes of scan results (1 BSSes)
> Scan results: 1
> Selecting BSS from priority group 0
> 0: 00:0f:66:d3:78:80 ssid='moreati.org.uk' wpa_ie_len=24 rsn_ie_len=0
>    selected
> Trying to associate with 00:0f:66:d3:78:80 (SSID='moreati.org.uk' freq=0 MHz)
> Cancelling scan request
> Automatic auth_alg selection: 0x1
> wpa_driver_ipw2100_set_auth_alg: auth_alg=0x1
> WPA: using IEEE 802.11i/D3.0
> WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
> WPA: using GTK TKIP
> WPA: using PTK TKIP
> WPA: using KEY_MGMT WPA-PSK
> WPA: Own WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
> No keys have been configured - skip key clearing
> wpa_driver_ipw2100_set_drop_unencrypted: enabled=1
> Setting authentication timeout: 5 sec 0 usec
> Wireless event: cmd=0x8b1a len=27
> Signal 2 received - terminating
> No keys have been configured - skip key clearing
> wpa_driver_ipw2100_set_wpa: enabled=0
> wpa_driver_ipw2100_set_drop_unencrypted: enabled=0
> wpa_driver_ipw2100_set_countermeasures: enabled=0
> 
> 
> _______________________________________________
> HostAP mailing list
> HostAP at shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap
> 
> 
>