EAP-TLS hostapd<>wpa_supplicant 0.3.7-pre fails

[Coert]

I am trying to read the WPA IE.  I found IEEE 802.11i, but that only
has the definition of the RSN IE.  Can you point me to the WPA IE
spec?


On Fri, 11 Feb 2005 10:32:08 -0800, Coert <coert.vonk at gmail.com> wrote:
> A workaround would be nice.  Maybe I am doing something wrong, but I
> switched to TKIP on both the authenticator and the supplicant, and
> still see these messages:
> 
>   WPA: RX message 3 of 4-Way Handshake from 00:02:6f:21:df:ff (ver=1)
>   WPA: IE KeyData - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2
> 02 01 00 00 50 f2 02 01 00 00 50 f2 01
>   WPA: No WPA/RSN IE for this AP known. Trying to get from scan results
>   WPA: Found the current AP from updated scan results
>   WPA: IE in 3/4 msg does not match with IE in Beacon/ProbeResp
> (src=00:02:6f:21:df:ff)
>   WPA: WPA IE in Beacon/ProbeResp - hexdump(len=26): dd 18 00 50 f2 01
> 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 01 01 00
>   WPA: WPA IE in 3/4 msg - hexdump(len=24): dd 16 00 50 f2 01 01 00 00
> 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 01
> 
> Updated traces and .conf files are attached
> 
> BTW I cross posted it on the madwifi-users list, as Jouni suggested.
> 
> /coert
> 
> On Fri, 11 Feb 2005 12:21:38 +0100, Gunter Burchardt
> <gbur at informatik.uni-rostock.de> wrote:
> > An easy workaround is to use only TKIP or CCMP, not both together.
> >
> > regards
> > gunter
> > _______________________________________________
> > HostAP mailing list
> > HostAP at shmoo.com
> > http://lists.shmoo.com/mailman/listinfo/hostap
> >
> 
> 
>