Problem with two cards

[Jerry]

> Feb  5 09:33:26 border_13_1 kernel: wlan1: cannot get RID fc06 (len=2) -
no PRI f/w
> Feb  5 09:33:26 border_13_1 kernel: wlan1: cannot get RID fd42 (len=6) -
no PRI f/w
> Feb  5 09:33:26 border_13_1 kernel: wlan1: cannot get RID fc0e (len=34) -
no PRI f/w
> Feb  5 09:33:26 border_13_1 kernel: wlan1: cannot get RID fc84 (len=2) -
no PRI f/w
> Feb  5 09:33:26 border_13_1 kernel: wlan1: cannot get RID fc83 (len=2) -
no PRI f/w
> Feb  5 09:33:26 border_13_1 kernel: wlan1: cannot get RID fc82 (len=2) -
no PRI f/w
> Feb  5 09:33:26 border_13_1 kernel: wlan1: cannot get RID fc09 (len=2) -
no PRI f/w
> Feb  5 09:33:26 border_13_1 kernel: wlan1: cannot get RID fd48 (len=2) -
no PRI f/w


This would appear to be a prism3 without primary firmware on the card.   You
need to get the firmware and load it at card initialization time using
hostap_fw_load  (edit the file for your configuration).

Now if this isnt a prism3 without firmware, then the 'get next tupple'
usually indicates the need for 'ignore_cis_vcc=0' in the
/etc/pcmcia/hostap_cs.conf file (edit the file and look at the bottom for an
example)

Good luck

Jerryf