hostapd possible bug

[amr nasr]

Hi,
Here is the output of the hostapd debug log file

Configuration file: /etc/hostapd.conf
Opening raw packet socket for ifindex 4921
Using interface wlan0ap with hwaddr 00:02:6f:05:52:ce and ssid '8021x'
wlan0: RADIUS Authentication server 216.143.235.102:1812
Flushing old station entries
Deauthenticate all stations
DATA
Data frame from not associated STA 00:02:6f:06:33:cd
mgmt::auth
authentication: STA=00:02:6f:06:33:cd auth_alg=0 auth_transaction=1 status_code=0 wep=0
  New STA
wlan0: STA 00:02:6f:06:33:cd IEEE 802.11: authentication OK (open system)
wlan0: STA 00:02:6f:06:33:cd WPA: event 0 notification
authentication reply: STA=00:02:6f:06:33:cd auth_alg=0 auth_transaction=2 resp=0
MGMT (TX callback) ACK
mgmt::auth cb
wlan0: STA 00:02:6f:06:33:cd IEEE 802.11: authenticated
mgmt::assoc_req
association request: STA=00:02:6f:06:33:cd capab_info=0x01 listen_interval=10
  new AID 1
wlan0: STA 00:02:6f:06:33:cd IEEE 802.11: association OK (aid 1)
MGMT (TX callback) ACK
mgmt::assoc_resp cb
wlan0: STA 00:02:6f:06:33:cd IEEE 802.11: associated (aid 1, accounting session 41FFFC3F-00000000)
wlan0: STA 00:02:6f:06:33:cd WPA: event 1 notification
wlan0: STA 00:02:6f:06:33:cd IEEE 802.1X: start authentication
IEEE 802.1X: 00:02:6f:06:33:cd AUTH_PAE entering state INITIALIZE
IEEE 802.1X: 00:02:6f:06:33:cd AUTH_PAE entering state INITIALIZE
DATA
IEEE 802.1X: 4 bytes from 00:02:6f:06:33:cd
   IEEE 802.1X: version=1 type=1 length=0
wlan0: STA 00:02:6f:06:33:cd IEEE 802.1X: received EAPOL-Start from STA
IEEE 802.1X: 00:02:6f:06:33:cd AUTH_PAE entering state DISCONNECTED
wlan0: STA 00:02:6f:06:33:cd IEEE 802.1X: unauthorizing port
IEEE 802.1X: 00:02:6f:06:33:cd BE_AUTH entering state IDLE
IEEE 802.1X: 00:02:6f:06:33:cd REAUTH_TIMER entering state INITIALIZE
IEEE 802.1X: 00:02:6f:06:33:cd AUTH_PAE entering state CONNECTING
IEEE 802.1X: Sending EAP Request-Identity to 00:02:6f:06:33:cd (identifier 0)
IEEE 802.1X: 00:02:6f:06:33:cd REAUTH_TIMER entering state INITIALIZE
IEEE 802.1X: 00:02:6f:06:33:cd REAUTH_TIMER entering state INITIALIZE
IEEE 802.1X: 00:02:6f:06:33:cd REAUTH_TIMER entering state INITIALIZE
DATA (TX callback) ACK
IEEE 802.1X: 00:02:6f:06:33:cd TX status - version=1 type=0 length=10 - ack=1
"hostapd.log" [noeol] 170L, 9082C            
     

Best Regards,
Amr Nasr                     
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20050201/6fdc9914/attachment.htm