hostap driver hangs "hard" (without final_version)

Holger Schurig hs4233
Thu Dec 22 01:33:40 PST 2005


On Thursday 22 December 2005 09:32, Holger Schurig wrote:

When I compile without #define final_version, then I get this:

[   26.260000] hostap_crypt: registered algorithm 'NULL'
[   26.620000] hostap_cs: CVS (Jouni Malinen <jkmaline at cc.hut.fi>)
[   26.920000] prism2_init_local_data()
[   27.200000] hostap_cs: Registered netdevice wifi0
[   27.240000] hostap_cs: index 0x01: Vcc 3.3, irq 45, io 
0xc88a0000-0xc88a003f
[   27.250000] prism2_hw_config()
[   27.250000] prism2_hw_init()
[   27.250000] hfa384x_cmd_no_wait()
[   27.260000] __hfa384x_cmd_no_wait()
[   27.920000] prism2_hw_init: initialized in 660 ms
[   27.920000] prism2_hw_init2()
[   27.920000] prism2_read_pda()
[   27.930000] prism2_enable_aux_port()
[   27.930000] hfa384x_from_aux()

Here we're hanging again.

[   37.300000] hostap_tick_timer()
[   37.300000] prism2_interrupt()
[   37.300000] prism2_check_magic()
[   37.310000] prism2_pda_ok()
[   37.310000] hfa384x_from_aux()
[   37.310000] prism2_pda_ok()
[   37.320000] hfa384x_from_aux()
[   37.320000] prism2_pda_ok()
[   37.320000] hfa384x_from_aux()
[   37.340000] prism2_interrupt()
[   37.340000] prism2_check_magic()
[   37.350000] prism2_interrupt()
[   37.350000] prism2_check_magic()
[   37.350000] prism2_pda_ok()
[   37.360000] prism2_enable_aux_port()
[   37.360000] prism2_enable_aux_port: was not enabled!?
[   37.480000] prism2_interrupt()
[   37.480000] prism2_check_magic()
[   37.480000] prism2_enable_aux_port(0) timed out
[   37.490000] wifi0: valid PDA not found
[   37.490000] hfa384x_disable_interrupts()
[   37.490000] hfa384x_events_only_cmd()
[   37.500000] prism2_get_version_info()
[   37.500000] hfa384x_get_rid()
[   37.500000] hfa384x_cmd()
[   37.510000] hfa384x_cmd_issue()
[   37.510000] prism2_hw_shutdown()
[   37.510000] hfa384x_events_only_cmd()
[   37.520000] wifi0: card already removed or not configured during shutdown
[   39.300000] hostap_tick_timer()
[   39.510000] wifi0: hfa384x_cmd: entry still in list? (entry=c3b7ee60, 
type=0, res=0)
[   39.510000] wifi0: hfa384x_cmd: command was not completed (res=0, 
entry=c3b7ee60, type=0, cmd=0x0021, param0=0xfd0b, EVSTAT=c0c0 INTEN=c0c0)
[   39.530000] hostap_cmd_queue_free()
[   39.530000] __hostap_cmd_queue_free()
[   39.530000] wifi0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, 
rid=fd0b, len=8)
[   39.540000] Could not get RID for component NIC
[   39.550000] hfa384x_disable_interrupts()
[   39.550000] hostap_cs: Initialization failed
[   39.600000] prism2_free_local_data()
[   39.600000] prism2_crypt_deinit_entries()
[   39.610000] prism2_clear_cmd_queue()
[   39.610000] prism2_download_free_data()
[   39.610000] prism2_download_free_data()
[   39.620000] prism2_clear_set_tim_queue()





More information about the Hostap mailing list