eapol_test configuration

[Norbert Wegener]

I have setup freeradius for 802.1x port authentication at a cisco switch 
with eap-tls and an appended look into an ad-server to get needed values 
form there. This works without problems.

Now I want to do some automated tests using eapol_test instead of the 
cisco switch.
Therefore I setup this configfile file:

network={
        key_mgmt=IEEE8021X
    eap=TLS
    identity="myid"
        client_cert="/home/norbert/8021x/ZZZZZ1EC-1763.crt"
        private_key="/home/norbert/8021x/ZZZZZ1EC-1763.key"
        phase1="TLS tunnel"
    ca_cert="/home/norbert/8021x/Sitest-ROOT-CA.cer"
}

and startet

 eapol_test -a192.168.1.1 -p 1645 -s maxen -c eapol_test.conf

freeradius receives:
ad_recv: Access-Request packet from host 149.246.133.44 port 32777, 
id=0, length=204
        User-Name = "myid"
        NAS-IP-Address = 127.0.0.1
        Calling-Station-Id = "00-00-00-00-00-02"
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        Connect-Info = "CONNECT 11Mbps 802.11b"
        EAP-Message = 
0x02000035012f4f3d5369656d656e732d323030352f434e3d4e6f726265727420576567656e65722054434749443d5a5a5a5a5a3145
        Message-Authenticator = 0x26b6fb63d6a3b87a5bf42fed7dd93939

but does not start an eap-tls authentication. Instead it directly 
searches the AD server.

Any idea on how to change that behaviour to the desired one would be 
appreciated.
Thanks
Norbert