changing PDA doesn't work

[Henrik Brix Andersen]

On Sat, 2005-08-27 at 18:57 +0100, Max Grabert wrote:
> 1. prism2_srec -D wlan0 >pda
> 2. cp pda pda.orig
> 3. vi pda
>    # (changing 0x0103, 0x0104 exactly as in your example above)
> 4. prism2_srec -v -r wlan0 prism2-firmware/primary/ak010101.hex
> prism2-firmware/1.7.4/rf010704.hex -P pda
> 5. prism2_srec -D wlan0 >pda-mod_ram
> 6. diff pda-mod_ram pda.orig
>    # shows no differences
> 7. prism2_srec -v -f wlan0 prism2-firmware/primary/pk010101.hex
> prism2-firmware/1.7.4/sf010704.hex -P pda
> 8. prism2_srec -D wlan0 >pda-mod_flash
> 9. diff pda-mod_flash pda.orig
>    # shows no differences
> 10. reboot
> 11. step 8 and 9 again, just to make sure; no difference

Dumping the PDA here after flashing doesn't show any changes either -
but when running `iwlist wlan0 channel` I see that the card now supports
channels 1-13 instead of 1-11.

Have you checked if the card supports channels 12 and 13 after flashing?

Regards,
Brix
-- 
Henrik Brix Andersen <brix at gentoo.org>
Gentoo Metadistribution | Mobile computing herd
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
Url : http://lists.shmoo.com/pipermail/hostap/attachments/20050827/28a9c5a8/attachment.pgp