hfa384x_cmd: command was not completed

[Luka Laurent]

Hello!
 We are trying to make our originaly developed platform working in WiFi mode 
(Linux kernel 2.6.2 PCMCIA 3.1.22 version).
We are using orinoco ana hostap drivers but we have problems with both of 
them. We hipe that someone can help us. It would be really great if you 
could give us some advices.
 By starting cardmgr we got a message:
  *wlan0: could not get own MAC address
wlan0: Port type setting to 6 failed
wlan0: MAC port 0 enabling failed
cardmgr[133]: executing: './network start wlan0'
cardmgr[133]: + Error for wireless request "Set Mode" (8B06) :
cardmgr[133]: + SET failed on device wlan0 ; Operation not supported.
cardmgr[133]: + Error for wireless request "Set ESSID" (8B1A) :
cardmgr[133]: + SET failed on device wlan0 ; Invalid argument.
NET: Registered protocol family 17
dhcpcd[197]: dhcpStart: retrying MAC address request (returned 
00:00:00:00:00:00
)
dhcpcd[197]: dhcpStart: retrying MAC address request (returned 
00:00:00:00:00:*
** 
 here is *dmesg* report:
  *prism2_hw_config: initialized in 16021 iterations
wlan0: trying to read PDA from 0x007f0000: OK
wlan0: hfa384x_cmd: entry still in list? (entry=c3eb6a0c, type=0, res=0)
wlan0: hfa384x_cmd: command was not completed (res=0, entry=c3eb6a0c, 
type=0, cm
d=0x0021, param0=0xfd0b)
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd0b, len=8)
Could not get RID for component NIC
wlan0: hfa384x_cmd: entry still in list? (entry=c3eb6a0c, type=0, res=0)
wlan0: hfa384x_cmd: command was not completed (res=0, entry=c3eb6a0c, 
type=0, cm
d=0x0021, param0=0xfd02)
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd02, len=8)
Could not get RID for component PRI
wlan0: hfa384x_cmd_issue: cmd reg was busy for 1000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0xfd02
wlan0: hfa384x_cmd: entry still in list? (entry=c3eb6a0c, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd20, len=8)
Could not get RID for component STA
wlan0: hfa384x_cmd_issue: cmd reg was busy for 1000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0xfd02
wlan0: hfa384x_cmd: entry still in list? (entry=c3eb6a0c, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd20, len=8)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 1000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0xfd02
wlan0: hfa384x_cmd: entry still in list? (entry=c3eb6a0c, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fc01, len=6)
wlan0: could not get own MAC address*
.........
 Thanks in advance
 Luka
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20050429/e3eee036/attachment.htm