wpa_supplicant not handshaking with wrtg54gs

Sat Apr 16 10:46:39 PDT 2005

I just bought a linksys wrtg54gs to replace my piece of crap SMC
wireless switch.  I had WPA working with it until I upgraded the
firmware (I think that was the event that stopped things from working
but am not positive).

wpa_supplicant on my client only shows me:

Apr 14 18:50:08.510615: Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver 'ndiswrapper'
Apr 14 18:50:08.511056: Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Apr 14 18:50:08.511138: Reading configuration file '/etc/wpa_supplicant.conf'
Apr 14 18:50:08.558285: eapol_version=1
Apr 14 18:50:08.558417: ap_scan=1
Apr 14 18:50:08.558498: fast_reauth=1
Apr 14 18:50:08.558994: Line: 464 - start of a new network block
Apr 14 18:50:08.559093: ssid - hexdump_ascii(len=5):
     69 6c 69 6e 78                                    ilinx           
Apr 14 18:50:08.559201: PSK - hexdump(len=32): [REMOVED]
Apr 14 18:50:08.559290: Line: 473 - start of a new network block
Apr 14 18:50:08.559369: ssid - hexdump_ascii(len=7):
     6c 69 6e 6b 73 79 73                              linksys         
Apr 14 18:50:08.559456: key_mgmt: 0x4
Apr 14 18:50:08.559535: PSK - hexdump(len=32): [REMOVED]
Apr 14 18:50:08.559688: Priority group 0
Apr 14 18:50:08.559782:    id=0 ssid='ilinx'
Apr 14 18:50:08.559886:    id=1 ssid='linksys'
Apr 14 18:50:08.559969: Initializing interface (2) 'wlan0'
Apr 14 18:50:08.613374: EAPOL: SUPP_PAE entering state DISCONNECTED
Apr 14 18:50:08.613506: EAPOL: KEY_RX entering state NO_KEY_RECEIVE
Apr 14 18:50:08.613589: EAPOL: SUPP_BE entering state INITIALIZE
Apr 14 18:50:08.613668: EAP: EAP entering state DISABLED
Apr 14 18:50:08.615878: EAPOL: External notification - portEnabled=0
Apr 14 18:50:08.615988: EAPOL: External notification - portValid=0
Apr 14 18:50:08.619857: Own MAC address: 00:90:4b:b0:22:08
Apr 14 18:50:08.620047: Setting scan request: 0 sec 100000 usec
Apr 14 18:50:08.620453: Wireless event: cmd=0x8b06 len=8
Apr 14 18:50:08.720857: State: DISCONNECTED -> SCANNING
Apr 14 18:50:08.720986: Starting AP scan (broadcast SSID)
Apr 14 18:50:11.721362: Scan timeout - try to get results
Apr 14 18:50:11.721774: Received 305 bytes of scan results (1 BSSes)
Apr 14 18:50:11.721858: Scan results: 1
Apr 14 18:50:11.721940: Selecting BSS from priority group 0
Apr 14 18:50:11.722019: 0: 00:12:17:41:37:c8 ssid='ilinx' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
Apr 14 18:50:11.722105:    selected
Apr 14 18:50:11.722188: Setting scan request: 10 sec 0 usec
Apr 14 18:50:14.748615: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Apr 14 18:50:14.749130: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Apr 14 18:50:21.722852: Starting AP scan (broadcast SSID)
Apr 14 18:50:24.723076: Scan timeout - try to get results
Apr 14 18:50:24.723481: Received 305 bytes of scan results (1 BSSes)
Apr 14 18:50:24.723596: Scan results: 1
Apr 14 18:50:24.723706: Selecting BSS from priority group 0
Apr 14 18:50:24.723814: 0: 00:12:17:41:37:c8 ssid='ilinx' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
Apr 14 18:50:24.723930:    selected
Apr 14 18:50:24.724056: Setting scan request: 10 sec 0 usec
Apr 14 18:50:34.724198: Starting AP scan (broadcast SSID)
Apr 14 18:50:37.724645: Scan timeout - try to get results
Apr 14 18:50:37.725066: Received 305 bytes of scan results (1 BSSes)
Apr 14 18:50:37.725179: Scan results: 1
Apr 14 18:50:37.725290: Selecting BSS from priority group 0
Apr 14 18:50:37.725401: 0: 00:12:17:41:37:c8 ssid='ilinx' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
Apr 14 18:50:37.725517:    selected
Apr 14 18:50:37.725643: Setting scan request: 10 sec 0 usec
Apr 14 18:50:47.729649: Starting AP scan (broadcast SSID)
Apr 14 18:50:50.730200: Scan timeout - try to get results
Apr 14 18:50:50.730613: Received 305 bytes of scan results (1 BSSes)
Apr 14 18:50:50.730723: Scan results: 1
Apr 14 18:50:50.730834: Selecting BSS from priority group 0
Apr 14 18:50:50.730941: 0: 00:12:17:41:37:c8 ssid='ilinx' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
Apr 14 18:50:50.731059:    selected
Apr 14 18:50:50.731201: Setting scan request: 10 sec 0 usec
Apr 14 18:51:00.731345: Starting AP scan (broadcast SSID)

and then just sits looping in that event cycle.  iwlist shows me:

$ /sbin/iwlist wlan0 scan
wlan0     Scan completed :
          Cell 01 - Address: 00:12:17:41:37:C8
                    ESSID:"ilinx"
                    Protocol:IEEE 802.11b
                    Mode:Managed
                    Frequency:2.437 GHz (Channel 6)
                    Quality:0/100  Signal level:-34 dBm  Noise level:-256 dBm
                    Encryption key:on
                    Bit Rate:1 Mb/s
                    Bit Rate:2 Mb/s
                    Bit Rate:5.5 Mb/s
                    Bit Rate:11 Mb/s
                    Bit Rate:18 Mb/s
                    Bit Rate:24 Mb/s
                    Bit Rate:36 Mb/s
                    Bit Rate:54 Mb/s
                    Bit Rate:6 Mb/s
                    Bit Rate:9 Mb/s
                    Bit Rate:12 Mb/s
                    Bit Rate:48 Mb/s
                    Extra:bcn_int=100
                    Extra:atim=0
                    Extra:wpa_ie=******

This seems pretty basic but nothing obvious is popping out at me.  Any
ideas?

b.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
Url : http://lists.shmoo.com/pipermail/hostap/attachments/20050416/5cdb93f4/attachment.pgp 